Can Plug DN 6 quick connector double, TST 060 series, brass be used with steam at 25 bar and what temperature limits apply?

Yes . Plug DN 6 quick connector double, TST 060 series, brass can be used with steam at 25 bar according to the provided description. The product specification lists steam among suitable media and gives a working pressure of 25 bar and a flow diameter of 6 mm. Temperature limits are not explicitly stated in the brief description; however, for brass quick couplings used with steam and hot oil, practical temperature limits are typically dictated by the brass alloy, seals, and any internal components (e.g., elastomer Oârings). Common brass fittings handle temperatures up to roughly 120â200 Â°C, but elastomer seals can reduce that range (e.g., NBR ~100 Â°C, EPDM ~120â150 Â°C, Viton/FKM ~200 Â°C). Recommendation: for safe use at 25 bar steam, confirm the exact maximum service temperature and seal material with the manufacturer or datasheet before operation.

Is Plug DN 6 quick connector double, TST 060 series, brass suitable for use with hot oil and what are the temperature limits?

Plug DN 6 quick connector double, TST 060 series, brass is suitable for use with hot oil and steam according to the product description. Working pressure is 25 bar and flow diameter is 6 mm. The body material is brass, which is compatible with many hot oils, but the maximum usable temperature depends on seals (not specified). Without seal data, assume typical brass quickâcoupler limits: up to ~120â150Â°C with highâtemperature rubber (e.g., Viton) or up to ~80â100Â°C with standard NBR. For exact maximum temperature for your oil and seal type, confirm seal material with the manufacturer.

Can Plug DN 6 quick connector double, TST 060 series, brass be used for circulating chilled water in mold cooling systems?

Yes. Plug DN 6 quick connector double, TST 060 series, brass can be used for circulating chilled water in mold cooling systems. Reasons: - The product description explicitly lists cooling injection molds and similar industrial cooling applications, which include circulating chilled water for mold temperature control. - Flow diameter 6 mm and working pressure 25 bar are suitable for typical mold cooling circuits; 25 bar far exceeds normal chilled-water pressures in mold cooling systems, providing a good safety margin. - Material brass is compatible with potable and process water and widely used in quick couplings for cooling lines. It also resists corrosion in typical chilled-water environments, though water chemistry (pH, dissolved oxygen, chloride content) should be controlled to avoid accelerated dezincification or corrosion in aggressive conditions. - The coupling is rated for other fluids (hot oil, steam), indicating robust construction and sealing suitable for temperature and pressure variations seen in mold cooling. Precautions: - Verify temperature range for seals (not supplied in your brief) to ensure compatibility with your chilled-water temperatures and any anti-freeze additives. - Ensure the 6 mm internal diameter provides required flow rate for your mold; smaller diameter increases pressure drop and may limit cooling capacity in high-flow demands. - Confirm no galvanic compatibility issues with connected lines or fittings and consider water treatment to protect brass components. Conclusion: Suitable in typical mold cooling setups, provided seal temperature compatibility and required flow rate are confirmed.

Plug DN 6 quick connector double, TST 060 series, brass

Additional information

Material	B – brass (bronze)

DN 6 quick coupling plug double (coupling). Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FW-060-HEF060	Double connector series 060 / series 060	-	25	In stock	0 zł		Enquiry
FW-060-HEF090	Double connector series 060 / series 090	-		In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 6 quick coupling plug double (coupling). Widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass.