Is the Plug DN 13 quick connector with male thread, TST 190 series, brass suitable for steam up to 200Â°C at 25 bar?

Yes. The Plug DN 13 quick connector with male thread, TST 190 series, brass is suitable for steam up to 200Â°C at 25 bar. The product specification explicitly lists steam as a compatible medium, a working pressure of 25 bar, and an operating temperature range up to +200Â°C (with Viton sealing). Materials (brass body/valve and stainless-steel spring) are compatible with steam service at these conditions. Ensure the connector version has Viton seals and confirm application-specific factors (cycle frequency, water chemistry, safety margins) with the supplier or your engineering team if needed.

Can Plug DN 13 quick connector with male thread, TST 190 series, brass be used with hot oil at 200Â°C and 25 bar?

Yes. Plug DN 13 quick connector with male thread, TST 190 series, brass can be used with hot oil at 200Â°C and 25 bar. The product specification lists suitability for hot oil and steam, a working pressure of 25 bar, and an operating temperature range up to +200Â°C (with Viton seals). Ensure the connector uses Viton seals and that installation and system conditions (thermal cycling, oil chemistry, and safety margins) meet your application requirements.

Can Plug DN 13 quick connector with male thread, TST 190 series, brass withstand repeated thermal cycling between -20Â°C and 200Â°C?

Yes. Plug DN 13 quick connector with male thread, TST 190 series, brass can withstand repeated thermal cycling between â20Â°C and +200Â°C, provided certain conditions are met. Why: The product specification lists an operating temperature range from â20Â°C to +200Â°C (with Viton seals). The main load-bearing materials are brass (plug body and valve) and stainless steel (spring), both of which tolerate repeated cycling across that temperature span in typical industrial use. Viton (FKM) seals are rated for high temperatures up to ~200Â°C and maintain sealing performance through many thermal cycles when compatible with the service media. Conditions and caveats: - Use the version specified with Viton seals (the stated +200Â°C limit applies with Viton). Other seal materials may have lower limits. - Ensure the conveyed medium (hot oil, steam, water, cleaning fluids) is chemically compatible with Viton and brass at the operating temperature; aggressive chemicals or steam at high temperature can accelerate seal or corrosion issues. - Repeated rapid temperature shocks, large temperature gradients, or thermal stresses beyond normal ramp rates can shorten seal life or fatigue components. - Adhere to the working pressure limit (25 bar) and proper installation/tightening to avoid mechanical overstress during cycling. - Regular inspection and maintenance (seal replacement, spring check) will extend reliable service life under thermal cycling. Conclusion: Under normal industrial conditions and with the Viton-sealed version, Plug DN 13 quick connector with male thread, TST 190 series, brass is suitable for repeated cycling between â20Â°C and +200Â°C, keeping the above precautions in mind.

Plug DN 13 quick connector with male thread, TST 190 series, brass

Additional information

Material	B – brass (bronze)

DN 13 quick coupling plug with external BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 13 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FW-190-EUB21	DN 13 plug with GZ 1/2" BSP, with valve	-	25	In stock	Enquiry
FW-190-EUB26	DN 13 plug with GZ 3/4" BSP, with valve	-	25	In stock	Enquiry
FW-190-EUBM24	Plug DN 13 with GZ M24x1.5, with valve	-	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 13 quick coupling plug with external BSP and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 13 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).