Can Plug DN 6 quick connector with male thread, TST 6 series, brass be used with hot oil and steam at up to 200Â°C and 10 bar?

Yes. Plug DN 6 quick connector with male thread, TST 6 series, brass can be used with hot oil and steam up to 200Â°C and 10 bar. The product specification explicitly lists suitability for hot oil and steam, a working pressure of 10 bar, and an operating temperature range up to +200Â°C when fitted with Viton seals. The construction materials (brass body and valve, stainless steel spring) are compatible with those media at the stated conditions. Ensure the version you select includes Viton seals and confirm compatibility with your specific oil/steam chemistry and system safety requirements (thermal expansion, cyclic temperature changes, and any applicable standards).

Can Plug DN 6 quick connector with male thread, TST 6 series, brass be used for steam and hot oil at temperatures up to 200Â°C?

Yes. Plug DN 6 quick connector with male thread, TST 6 series, brass can be used for steam and hot oil up to 200Â°C. The product description explicitly lists steam and hot oil among suitable media and specifies an operating temperature range from -20Â°C to +200Â°C (with Viton seals), a working pressure of 10 bar, a 6 mm flow diameter, brass body/valve and stainless steel spring-so it is rated for those conditions. Ensure compatibility with your system pressure, temperature cycling, and any specific chemical compatibility beyond the general media listed.

Is Plug DN 6 quick connector with male thread, TST 6 series, brass suitable for use with hot oil under pressure?

Yes. Plug DN 6 quick connector with male thread, TST 6 series, brass is suitable for use with hot oil under pressure, provided operating conditions stay within the stated limits. Key specs relevant to hot oil service: - Media compatibility: explicitly lists hot oil and steam. - Working pressure: 10 bar (max). - Operating temperature: -20Â°C to +200Â°C when fitted with Viton seals. - Materials: brass plug body and valve, stainless steel spring. compatible with many heat-transfer oils (check specific oil compatibility with brass/Viton). - Flow diameter: 6 mm. Recommendations and cautions: - Ensure system pressure does not exceed 10 bar and peak transients are below that limit. - Ensure operating temperature of the oil does not exceed +200Â°C; prolonged exposure near the upper limit can shorten seal life. - Verify compatibility of the specific hot oil with brass and Viton; some aggressive additives or oxidized oils may affect materials. - For steam or higher-temperature oil service, confirm seal compound (Viton) is used and in good condition; consider higher-temperature seals if needed. - Confirm thread type (BSPT, NPT, metric) matches your system and that proper installation and torque are applied to avoid leaks. Conclusion: Suitable for hot oil under pressure if pressure â¤10 bar, temperature â¤200Â°C (with Viton), and compatibility checks are performed.

Plug DN 6 quick connector with male thread, TST 6 series, brass

Additional information

Material	B – brass (bronze)

DN 6 quick coupling plug with external BSPT, NPT, and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 10 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FW-6-EUM10	Plug DN 6 with GZ M10x1, without valve	-	10	In stock	Enquiry
FW-6-EUM14	Plug DN 6 with GZ M14x1.5, without valve	-	10	In stock	Enquiry
FW-6-RU10	DN 6 plug with GZ 1/8" BSPT, without valve	-	10	In stock	Enquiry
FW-6-RU13	DN 6 plug with GZ 1/4" BSPT, without valve	-	10	In stock	Enquiry
FW-6-RU17	DN 6 plug with GZ 3/8" BSPT, without valve	-	10	In stock	Enquiry
FW-6-RUB13	DN 6 plug with GZ 1/4" BSPT, with valve	-	10	In stock	Enquiry
FW-6-RUB17	DN 6 plug with GZ 3/8" BSPT, with valve	-	10	In stock	Enquiry
FW-6-TU10	DN 6 plug with GZ 1/8" NPT, without valve	-	10	In stock	Enquiry
FW-6-TU13	DN 6 plug with 1/4" NPT female thread, without valve	-	10	In stock	Enquiry
FW-6-TU17	DN 6 plug with GZ 3/8" NPT, without valve	-	10	In stock	Enquiry
FW-6-TUB13	DN 6 plug with 1/4" NPT valve	-	10	In stock	Enquiry
FW-6-TUB17	DN 6 plug with GZ 3/8" NPT, with valve	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 6 quick coupling plug with external BSPT, NPT, and metric thread, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, steam. Flow diameter: 6 mm. Working pressure: 10 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (plug body, valve), stainless steel (spring).