Is the Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass suitable for steam service up to 200Â°C and 25 bar?

Yes. Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass is suitable for steam service up to 200Â°C and 25 bar. The product description specifies suitability for steam, a flow diameter of 6 mm, working pressure of 25 bar and an operating temperature range up to +200Â°C (with Viton), and materials (brass body and stainless steel internal parts) appropriate for such applications. Ensure compatibility with your specific steam system (chemistry, continuous duty, thermal cycling) and follow applicable safety and installation standards.

Can the Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass be used for circulating hot oil at 180Â°C and 25 bar?

Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass: according to the provided specs it is rated for working pressure 25 bar and operating temperature up to +200Â°C (with Viton seals). You ask about circulating hot oil at 180Â°C and 25 bar - temperature is within the stated limit, pressure equals the rated maximum. However operating continuously at the exact max ratings (180Â°C oil vs 200Â°C limit; 25 bar = max pressure) leaves little safety margin. Also compatibility with hot oil depends on seal and lubricant chemical resistance (Viton is generally suitable for many hot oils) and thermal effects on the brass components and spring. For safe use, confirm continuous-duty validation with manufacturer, ensure proper safety factor (preferably <max pressure), and verify seal material and oil compatibility for long-term operation.

Can the Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass be used for potable water applications?

Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass. based on the provided description. is designed for industrial cooling of injection molds and casting parts, and for use with water in cleaning machines, hot oil and steam. Materials: brass body/connection/valve sleeve, stainless steel spring/ring/balls; flow diameter 6 mm; working pressure 25 bar; temperature range â20 Â°C to +200 Â°C (with Viton). Can it be used for potable (drinking) water? Not recommended without manufacturer confirmation and certification. Reasoning: - Brass may contain lead or other impurities unless specifically manufactured to meet potable-water (Drinking Water Directive/NSF/WRAS/ACS) standards; the description does not state any potable-water approval. - Stainless-steel internal parts reduce corrosion risk, but overall compliance depends on material composition, dezincification resistance (DZR brass), and approved seals (food-grade/Viton may be acceptable but must be certified). - Cleanliness and surface finish required for potable systems are not specified. - Approvals/certifications for drinking water (e.g., NSF/ANSI 61, WRAS, ACS, or local equivalents) are not mentioned; without them, regulatory compliance and health safety cannot be guaranteed. Conclusion: Unless the manufacturer explicitly certifies Socket 90Â° DN 6 quick coupling with hose end, TST 060 series, brass for potable water (providing relevant certifications and material declarations such as DZR brass and approved seal compounds), it should not be used for drinking water applications. Contact the manufacturer/supplier for certification and material safety data before using for potable water.

Socket 90° DN 6 quick coupling with hose end, TST 060 series, brass

Additional information

Material	B – brass (bronze)

90° socket DN 6 quick coupling with “tail” for hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FW-CSK060-06-90	90° socket DN 6 with end for 6 mm hose, with valve	6	25	In stock	Enquiry
FW-CSK060-08-90	90° socket DN 6 with 8 mm hose end, with valve	8	25	In stock	Enquiry
FW-CSK060-09-90	90° socket DN 6 with 9 mm hose end, with valve	10	25	In stock	Enquiry
FW-CSK060-10-90	90° socket DN 6 with 10 mm hose end, with valve	10	25	In stock	Enquiry
FW-SK060-06-90	90° socket DN 6 with end for 6 mm hose, without valve	6	25	In stock	Enquiry
FW-SK060-08-90	90° socket DN 6 with end for 8 mm hose, without valve	8	25	In stock	Enquiry
FW-SK060-09-90	90° socket DN 6 with end for 9 mm hose, without valve	10	25	In stock	Enquiry
FW-SK060-10-90	90° socket DN 6 with end for 10 mm hose, without valve	10	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° socket DN 6 quick coupling with “tail” for hose, with or without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. It can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (viton). Material: brass (socket body, connection, valve sleeve), stainless steel (spring, ring, balls).