Is the TRI-CLAMP tip with GZ BSP, PTFE, 3C series compatible with food-grade hoses and which gasket material is recommended?

Yes . the TRI-CLAMP tip with GZ BSP, PTFE, 3C series Format is compatible with food-grade hoses. The stub is intended for flexible, smoothâwalled, unreinforced hoses including PTFE, silicone, PVC, PUR and TYGONÂ®, which are commonly available in foodâgrade versions, and the TriâClamp end meets sanitary standards (DIN 32676, ISO 2852, BS 4825). Gasket recommendation: supplied without a gasket, so choose gasket material based on media and regulatory needs. For food applications, EPDM and PTFE are the preferred choices: - EPDM: widely used for food and beverage, good chemical resistance to cleaning agents and steam, excellent sealing for many food media. - PTFE (or GylonÂ® based on PTFE): excellent chemical inertness, nonâcontaminating, suitable for aggressive media and high purity/sterile processes. Avoid FKM for general food contact unless specifically certified for your product and temperature/chemical profile. Always verify gasket material FDA/ EU foodâcontact certification for your specific application and order the gasket separately.

Can the TRI-CLAMP tip with GZ BSP, PTFE, 3C series withstand sterilization processes like autoclaving or CIP?

TRI-CLAMP tip with GZ BSP, PTFE, 3C series: Yes-generally resistant to common sterilization methods. Body materials listed (polypropylene, PVDF) and PTFE hose stub/gasket compatibility indicate good chemical and thermal resistance. PVDF and PTFE tolerate autoclaving and CIP; polypropylene is less heat-resistant but can withstand some CIP cycles and lower-temperature sterilization. Critical points: gasket material (EPDM, FKM, GylonÂ®, PTFE) must be chosen per medium and sterilization temperature-PTFE and GylonÂ® best for high-temperature/autoclave; EPDM/FKM have lower temperature limits. Working pressure 6 bar remains valid if temperature limits are respected. Recommendation: confirm exact polymer grades and maximum service temperatures with manufacturer and validate via process testing before routine autoclave/CIP use.

Does the TRI-CLAMP tip with GZ BSP, PTFE, 3C series allow reuse of the clamping ring across multiple hose changes?

Yes. The TRI-CLAMP tip with GZ BSP, PTFE, 3C series allows reuse of the clamping ring across multiple hose changes. The integrated sleeve and internal clamping ring in the knurled nut are flexible and designed to be reused multiple times within the same connection. Note: gasket is supplied separately and must be chosen by material (EPDM, FKM, GylonÂ®, PTFE) appropriate to the medium.

TRI-CLAMP tip with GZ BSP, PTFE, 3C series

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Straight end TRI-CLAMP with self-clamping hose stub series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made from EPDM, FKM, Gylon®, and PTFE. The stub is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON^®. It features an integrated sleeve, facilitating installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. Material: polypropylene, PVDF. Working pressure: 6 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-3C100TA250640PP	TRI-CLAMP end (series 3C) 25 mm, hose 4x6 mm (1A), polypropylene	4	6	In stock	Enquiry
EM-3C100TA250640PV	TRI-CLAMP end (series 3C) 25 mm, hose 4x6 mm (1A), PVDF	4	6	In stock	Enquiry
EM-3C100TA250643PV	TRI-CLAMP end (series 3C) 25 mm, hose 6x8 mm (1A), PVDF	6	6	In stock	Enquiry
EM-3C100TA250645PP	TRI-CLAMP end (series 3C) 25 mm, hose 8x10 mm (1A), polypropylene	8	6	In stock	Enquiry
EM-3C100TA250645PV	TRI-CLAMP end (series 3C) 25 mm, hose 8x10 mm (1A), PVDF	8	6	In stock	Enquiry
EM-3C100TA250648PP	TRI-CLAMP end (series 3C) 25 mm, hose 10x12 mm (1A), polypropylene	10	6	In stock	Enquiry
EM-3C100TA250648PV	TRI-CLAMP end (series 3C) 25 mm, hose 10x12 mm (1A), PVDF	10	6	In stock	Enquiry
EM-3C100TA341643PV	TRI-CLAMP end (series 3C) 34 mm, hose 6x8 mm (1A), PVDF	6	6	In stock	Enquiry
EM-3C100TA341645PP	TRI-CLAMP end (series 3C) 34 mm, hose 8x10 mm (1A), polypropylene	8	6	In stock	Enquiry
EM-3C100TA341645PV	TRI-CLAMP end (series 3C) 34 mm, hose 8x10 mm (1A), PVDF	8	6	In stock	Enquiry
EM-3C100TA341648PP	TRI-CLAMP end (series 3C) 34 mm, hose 10x12 mm (1A), polypropylene	10	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Straight end TRI-CLAMP with self-clamping hose stub series 3C type EM finds wide application in laboratories, medicine, pharmaceutical, chemical, and food industries. The Tri-Clamp (Triclover) end is manufactured according to DIN 32676, ISO 2852, and BS 4825 standards. Supplied without a gasket, which must be ordered separately depending on the medium. Gaskets are available in materials made from EPDM, FKM, Gylon®, and PTFE. The stub is designed for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone, and TYGON^®. It features an integrated sleeve, facilitating installation, and hose locking occurs via a clamping ring located inside the knurled nut. Due to its flexibility, the clamping ring can be reused multiple times in the same connection. Material: polypropylene, PVDF. Working pressure: 6 bar.