Freeze protection heated hose for water ETH HWI 19/25

Technical information

Inner layer:

smooth, black EPDM rubber

Reinforcement:

synthetic braid

Outer layer:

black EPDM rubber

Standard length:

10 m, 15 m, 20 m, 30 m, 35 m, 40 m i 60 m (minimum length available: 10 m)

Available diameters:

19 mm (ETH HWI 19) or 25 mm (ETH HWI 25), wall thickness of about 4-5 mm

Working temp. range:

-20°C to +80°C

Max. working press.:

10 bar

Supply voltage::

230 V AC

Power:

10-20 W/m

Temperature control:

HTI-6 mini-controller set to +10°C (other temperature settings in the range of 0-80°C on request)

Connecting cable:

1.5 m standard length (other lengths on request)

Plug:

Schuko plug

Protection rating:

up to IP 44 (EN 60529), protection class I

Hose fittings:

side 1: GEKA PLUS in brass (with a tee connector to insert the heater)
side 2: GEKA PLUS in brass

ETH HWI 19/25

Compact, delivery rubber hose with a heater mounted inside, designed for industrial water to prevent it from freezing in sub-zero ambient temperatures.

Advantages:

mini-controller mounted in the tee connector keeps the temperature of the medium constantly above the freezing point of water
special positioning of the heating element ensures much lower energy consumption than that of standard heated hoses – the appropriately impregnated heating element is placed inside the hose and is in direct contact with the medium
available in 19 mm and 25 mm diameters, and 10 to 60 metre lengths

Application: