ECODORA diaphragm pumps, air operated diaphragm pumps, designed to pump a wide range of fluids, even the fluids of high viscosity (chemicals, petrochemical products, suspension fluids e.g. waste oils, waste water, sewage or fluids containing suspended solids up to a few millimetres in size, solvents, emulsion, varnish and many other)  in all branches of the industry. The pumps push the fluid through the collectors using two membranes that are connected by a centre shaft. The body of the pumps is made either of aluminium or polypropylene.  Available in AISI 316 steel.

  • Suitable for the most aggressive operating environments

    The pumps are common in various operating environments, also in the most aggressive.

  • Pump protection in case of running dry

    As opposed to other types of pumps, diaphragm pumps are not damaged by dry running, e.g. when one of the lines is blocked.

  • ATEX certified

    Certified for use in potentially explosive atmospheres.

  • Can operate fully submerged or partly submerged in the fluid

    First, always check the chemical resistance of the pump elements for the fluid they will be immersed in.

    Note: the air outlet of the pump must not be immersed in the fluid, there must be an air exhaust; extend the air outlet above the fluid surface using e.g. a hose.

  • Full range of technical solutions to find the best pump to suit your needs

    Several types of pumps come with different technical solutions e.g. pumps with a double inlet and single outlet.

  • There is a vast selection of pump accessories and spare parts available to choose from.
Application
Car washes
Automotive
Industry and oil mining

Diaphragm pump series 120-AB 1/2” / 1000-AB 1”

Pompy membranowe przemysłowe z odlewanego aluminium

Industrial diaphragm pump (pumping ratio 1:1) made of conductive material (aluminium) designed to transfer (pump) various types of fluids in agriculture, automotive industry, construction industry, road construction, mining.

  • Industrial diaphragm pump in cast aluminium.
  • Compliant with ATEX Directive II 2GD c IIB T4 X (zone 1).
  • Can be mounted on wall brackets, on trolleys, in machines, on the floor, on hose reels etc.

Diaphragm pump series 120-PPAB-M 1/2” / 120-PPAB-D 1/2”

Pompy membranowe przemysłowe z polipropylenu

Industrial diaphragm pump (pumping ratio 1:1) made of polypropylene (the center block of the engine made of aluminium) designed to transfer (pump) various types of fluids in the automotive industry, oil industry, agriculture, chemical industry, varnish industry, paper industry.

  • Industrial diaphragm pump in polypropylene.
  • Compliant with ATEX Directive  II 3GD c TX (zone 2).
  • Can be mounted on wall brackets, on trolleys, in machines, on the floor, on hose reels etc.
  • Series 120-PPAB-M diaphragm pump has two fluid inlet connections and one connection for a drum.

See how a diaphragm pump works