About Lukasz Szczesiak

This author has not yet filled in any details.
So far Lukasz Szczesiak has created 15 blog entries.

Spir Star hose DN4 with working pressure up to 3035 bar for ultra high pressure water jetting (UHP water jetting)

Inner layer polyoxymethylene (POM) Outer layer polyamide (PA) Reinforcement 4 braids of steel wire Working pressure up to 3035 bar (bursting pressure from 6100 bar) Working temperature from -30°C to +70°C Advantages: higher working pressure compared to our current SS-NW-03/6 hose for similar applications - now it is 3035 bar instead of [...]

2023-09-07T10:02:36+02:00

Heavy-duty pipe clamp with DÄMMGULAST® anti-vibration lining

Buy online High-quality, robust, two-part steel clamp for heavy dynamic loads with DÄMMGULAST® anti-vibration lining and two locking bolts secured with plastic washers to protect them from slipping out when tightened. The bolts allow some adjustment to adapt to larger variations in pipe diameter. The anti-vibration lining with yellow identification strip (average sound level improvement [...]

2023-09-07T11:38:42+02:00

Rewinding brake and automatic hose guide for Ecodora spring hose reels

Rewinding brake makes operation safer. Reduces hose rewinding speed in case of sudden hose release (accidentally letting go of the hose), hence it improves operator safety and decreases the risk of damage to accessories fitted to the end of the hose wound on the reel. Designed for mounting on all Ecodora [...]

2023-09-07T12:44:10+02:00

High-pressure regulators and changeover stations

Safe and efficient gas transfer Gases can be supplied as compressed gas in high-pressure cylinders, low-pressure cryogenic cylinders or pipeline systems. High pressure regulators are used to obtain a desired compressed gas pressure. Proper selection of the regulator is critical to the safe and efficient transfer of gas from a [...]

2023-01-30T15:42:48+01:00

Ecodora automatic hose reels for air, water, detergents

Material powder coated carbon steel (series 250/310), AISI 304 stainless steel (series 254/314) Working temperature up to +70°C Buy online Complete hose reels designed for indoor and outdoor installation. All carbon steel or all AISI 304 stainless steel housing High-quality polyurethane hose Hose fittings secured with strain relief springs Swivel coupling on [...]

2023-09-07T13:04:48+02:00

Steam gun

Material stainless steel (main elements), heat resistant plastic Sealing glass fibre reinforced PTFE Working pressure 10 bar Working temperature up to + 180°C (with peaks up to + 210°C) Top quality steam gun compliant with health and safety requirements for steam handling.  Comes with a swivel coupling hose inlet. Available with [...]

2022-11-30T12:36:55+01:00

Victoria® Premium saturated steam hose

Inner layer Black rubber IIR Reinforcement Double steel wire cord Outer layer Red EPDM rubber, pinpricked Working temperature from -40⁰C to +210⁰C Robust and flexible, red delivery hose with steel reinforcement for saturated steam. The inner layer has a very low permeability level and  very high resistance to popcorning, which  ensure extended [...]

2022-11-30T13:35:30+01:00

Industrial diaphragm pumps

ECODORA diaphragm pumps, air operated diaphragm pumps, designed to pump a wide range of fluids, even the fluids of high viscosity (chemicals, petrochemical products, suspension fluids e.g. waste oils, waste water, sewage or fluids containing suspended solids up to a few millimetres in size, solvents, emulsion, varnish and many other)  in all branches of the [...]

2022-11-30T14:58:30+01:00

Stainless steel hygienic valves

Body material AISI 304 stainless steel (standard); AISI 316L stainless steel (option) Sealing VMQ (standard); FPM (option); EPDM (option); HNBR (option) Leakage rate A according to DIN EN 12266-1 Working pressure 10 bar (DN10 ÷ DN150); 6 bar (DN200) Stainless steel hygienic couplings Stainless steel hygienic valves designed for the food [...]

2023-09-07T13:30:07+02:00

Pressure sprayers for every kind of sites with stringent cleanliness and hygiene requirements

Devices for non-toxic spraying of low-viscosity detergent fluids. Suitable for spraying surfaces and areas that require disinfection, but also for washing vehicle engines, blacking, lubrication. After they are filled with specific fluid for ¾ of their capacity and topped up with air under 6-8 bar pressure, they are fully autonomous. No continuous connection to compressed [...]

2022-11-30T15:27:56+01:00
Go to Top