Is the 16-channel comb nozzle, polyamide, series 470 suitable for continuous cleaning and cooling at up to 6 bar and temperatures from -10Â°C to +50Â°C?

Yes. The 16-channel comb nozzle, polyamide, series 470 is suitable for continuous cleaning and cooling at up to 6 bar and temperatures from -10Â°C to +50Â°C. Its construction (blue polyamide) and specification list a maximum pressure of 6 bar and an operating temperature range of -10Â°C to +50Â°C, matching your stated requirements. Note the nozzle is supplied finished with an external 1/4" BSP thread and without an adapter.ensure your system uses compatible fittings for continuous operation.

Can the 16-channel comb nozzle, polyamide, series 470 be used without an adapter with a 1/4" BSP external thread?

Yes. The 16-channel comb nozzle, polyamide, series 470 with flat flow and finished with external thread 1/4" BSP is designed to be used without an adapter. It is ideal for cleaning and cooling, made of blue polyamide, rated to a maximum pressure of 6 bar and suitable for operating temperatures from -10Â°C to +50Â°C.

Does the 16-channel comb nozzle, polyamide, series 470 require special maintenance for long-term use at up to 6 bar?

The 16-channel comb nozzle, polyamide, series 470 does not require any special maintenance to operate long-term at up to 6 bar, provided normal precautions are followed. Key points: - The nozzle is rated for a maximum pressure of 6 bar and an operating temperature range of -10Â°C to +50Â°C; use within these limits avoids premature wear or damage. - Routine checks: inspect periodically for blockages, wear, cracks or deformities in the polyamide body and threads; clear any debris from the 16 channels to maintain consistent flat flow and cooling/cleaning performance. - Thread and sealing: ensure the external 1/4" BSP thread is clean and undamaged; use compatible fittings and proper sealing (e.g., PTFE tape if required) to prevent leaks and avoid over-tightening that could crack the polyamide. - Water quality: minimise abrasive particles, scale, or corrosive fluids in the supply; install filters or strainers upstream if the medium contains sediments to prevent channel clogging. - Thermal and chemical exposure: avoid prolonged exposure to temperatures or chemicals outside the specified range; aggressive solvents or high temperatures can degrade polyamide. - Storage and handling: store and handle to prevent impact or UV/prolonged sunlight that can embrittle plastic. - Replacement: if flow becomes uneven, channels are damaged, or the thread is compromised, replace the nozzleâpolyamide nozzles are inexpensive and replacement avoids performance loss. In summary, no special maintenance beyond standard inspection, cleaning, proper fitting, and protecting from out-of-spec conditions is required for long-term use up to 6 bar.

16-channel comb nozzle, polyamide, series 470

Air guns, All products/

Additional information

16-channel comb nozzle, flat flow, finished with external thread 1/4″ BSP. Ideal for cleaning and cooling. Without adapter. Material: blue polyamide. Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-470K58	Flat nozzle 16-stream, width 47 mm, GZ 1/4" BSP, (POM)	-	6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

16-channel comb nozzle, flat flow, finished with external thread 1/4″ BSP. Ideal for cleaning and cooling. Without adapter. Material: blue polyamide. Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.