Is the Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 compatible with both cooling liquids and compressed air?

Yes. The Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 is compatible with both cooling liquids and compressed air. The product description explicitly states it is designed for cooling liquids for molds in plastic processing and for compressed air installations (as well as gas cylinders and other technical fields). Materials and specs that support this compatibility: brass components with treated stainless steel retaining rings/springs/balls, Viton seals, and a working pressure of 15 bar.suitable for typical cooling fluids and compressed air applications.

Can the Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 withstand temperatures from cooling liquids and hot air?

Yes. The Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 is suitable for cooling liquids and hot air within typical application limits. Its brass construction and stainlessâsteel internal parts provide good thermal resistance and mechanical strength; Viton seals withstand a wide temperature range (approximately -20Â°C to +200Â°C, depending on specific grade). Working pressure is 15 bar, so ensure your system stays within that. For continuous exposure to higher temperatures or aggressive fluids, verify the exact Viton grade and consult the manufacturer for longâterm compatibility and maximum allowed temperatures.

Does the Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 resist corrosion in saline or chemical cooling fluids?

Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 offers good resistance to saline and many chemical cooling fluids, but with important limitations. Why it resists: - Main body and most components are brass, which has reasonable corrosion resistance to water-based fluids and many mild saline solutions. - Retaining rings, springs and balls are made of treated stainless steel, which improves resistance to corrosion compared with untreated steels. - Viton sealing provides excellent chemical resistance to a wide range of oils, greases and many aggressive fluids, and good temperature stability. - Rated working pressure 15 bar, suitable for typical cooling circuits. Limitations and cautions: - âBrassâ is susceptible to dezincification and pitting in highly corrosive saline environments (high chloride concentration, salt spray, brines) or in presence of certain aggressive chemicals; long-term exposure can degrade mechanical strength and sealing. - Corrosion resistance depends on the exact grade of the âtreatedâ stainless steel; some grades handle chlorides better (e.g., 316/1.4401) than others (e.g., 304). The description does not specify grade, so resistance to aggressive chlorides cannot be guaranteed. - Viton resists many chemicals but is not compatible with some strong acids, ketones, or certain amines; compatibility should be checked against the specific cooling fluid. - Temperature, concentration, flow conditions and maintenance (e.g., presence of dissolved oxygen, pH, contaminants) strongly affect longevity. Recommendation: For routine cooling fluids and mild saline solutions, Quick coupling socket 45Â° for injection molds with hose end and valve, DYROS series 6 should perform acceptably. For concentrated saline, aggressive chloride-containing fluids, or specific chemicals, confirm stainless steel grade and perform fluid compatibility tests or consult the manufacturer for suitability and expected service life.

Quick coupling socket 45° for injection molds with hose end and valve, DYROS series 6

Additional information

Material	B – brass (bronze)

Quick coupling socket 45° DYROS series 6 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-VK614-45	45° socket DN 6 with 1/4" hose connection, with valve	6	15	In stock	Enquiry
DY-VK615-45	45° socket DN 6 with end for hose 5/16", with valve	8	15	In stock	Enquiry
DY-VK616-45	45° socket DN 6 with 3/8" hose connection, with valve	10	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket 45° DYROS series 6 with hose end and shut-off valve. Designed for cooling liquids for molds in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.