Is the 6-channel comb nozzle with adapter, polyamide, series 470 compatible with standard M12x1.25 fittings and safe to use at 6 bar pressure?

Yes. The 6-channel comb nozzle with adapter, polyamide, series 470 is finished with external thread M12x1.25, so it is compatible with standard M12x1.25 fittings. It is rated for a maximum pressure of 6 bar, so using it at 6 bar is within its specified pressure limit. The nozzle body is polyamide (blue) and the adapter is aluminum; operating temperature range is â10Â°C to +50Â°C, so ensure system and environment stay within that range. Follow proper installation and inspect threads/seals for leaks before full use to ensure safe operation.

Can the 6-channel comb nozzle with adapter, polyamide, series 470 be used for food-contact cleaning or in hygienic environments?

No - the 6-channel comb nozzle with adapter, polyamide, series 470 is not suitable for food-contact cleaning or hygienic environments. It is made of blue polyamide (nozzle) and aluminum (adapter), materials not specified as food-grade or compliant with food-contact regulations. The product description (flat flow, external thread M12x1.25, max 6 bar, operating temperature -10Â°C to +50Â°C) does not state any hygienic certifications, FDA/EC food-contact approval, or suitability for sanitary cleaning. For food or hygienic use, choose nozzles explicitly certified for food contact and resistant to required cleaning/disinfection procedures.

Does the 6-channel comb nozzle with adapter, polyamide, series 470 require a specific torque for safe M12x1.25 installation?

No specific torque is specified in the provided description for the 6-channel comb nozzle with adapter, polyamide, series 470. Explanation: The product data you gave (6-channel comb nozzle, flat flow, finished with external thread M12x1.25; ideal for cleaning and cooling; with adapter; nozzle material blue polyamide; adapter aluminum; maximum pressure 6 bar; operating temperature -10Â°C to +50Â°C) does not include an installation torque value. For safe M12x1.25 installation you should: - Use a suitable thread sealant or PTFE tape if required by your system (check system compatibility with polyamide/aluminum components). - Tighten to a torque typical for M12x1.25 metal fittings of similar size and materialâcommonly in the range of about 15â25 Nm when mating to metal threadsâbut treat this only as a general guideline, not a manufacturer specification. - Avoid over-tightening to prevent damaging the plastic polyamide nozzle or aluminum adapter threads; hand-start the thread, then tighten with a wrench while supporting the adapter. - If the nozzle threads into a plastic port or a soft material, use much lower torque and consider using a thread sealant instead of high torque. - When in doubt, contact the nozzle manufacturer or supplier for the exact recommended torque and installation instructions, or follow the torque spec of the mating component. Because no explicit torque is provided in the description, follow cautious, application-specific practices and verify with the manufacturer for critical installations.

6-channel comb nozzle with adapter, polyamide, series 470

Air guns, All products/

Additional information

6-channel comb nozzle, flat flow, finished with external thread M12x1.25. Ideal for cleaning and cooling. With adapter. Material: blue polyamide (nozzle), aluminum (adapter). Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-470K61	Flat nozzle 6-stream, narrow 27 mm, GZ M12x1.25, (POM)	-	6	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

6-channel comb nozzle, flat flow, finished with external thread M12x1.25. Ideal for cleaning and cooling. With adapter. Material: blue polyamide (nozzle), aluminum (adapter). Maximum pressure: 6 bar. Operating temperature: from -10°C to +50°C.