Can the Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F be used with soft plastic hoses at 18 bar without additional clamps?

Yes . the Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F can be used with soft plastic hoses at 18 bar without additional clamps, provided the hose is compatible with push-on fittings and sized correctly. The product description states it is designed specifically for connecting hoses made of soft plastics; the connection is achieved by pushing the hose onto the fitting and tightening it by screwing on the nut. With a working pressure of 18 bar and nickel-plated brass construction, the coupling is intended to secure the hose at that rated pressure when installed as described. Important considerations to ensure safe, leak-free service: - Match inner hose diameter exactly to the fittingâs barb dimensions. - Verify the hose material and wall construction are rated for 18 bar continuous working pressure. - Ensure the nut is fully tightened per manufacturer instructions to engage the sealing/profile correctly. - Inspect for compatibility with the media (air, oils, etc.) and temperature range. - For dynamic/moving applications, vibration, or if the hose is aged/damaged, use a clamp or alternative securement for added safety. If any of the above cannot be guaranteed, add a suitable clamp or use a dedicated clamped fitting.

Is the Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F safe for long-term use on soft plastic hoses at 18 bar?

The Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F can work at 18 bar on soft plastic hoses, but long-term safety depends on several factors not guaranteed by the brief description. The push-on + screw-nut retention and nickel-plated brass body are suitable for many applications, yet soft plastic hoses may creep, expand or slip over time under constant pressure and vibration. To ensure safe long-term use: verify the specific hose materialâs pressure rating and compatibility with 18 bar; confirm the hose outer diameter matches the fitting and the nut provides sufficient mechanical grip (or use a hose clamp/crimp if required); check temperature, dynamic loads and media compatibility; inspect periodically for slippage, wear or leaks. If any doubt, choose a barbed/crimped or crimp-sleeve connection certified for continuous 18 bar service.

Does the Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F require hose clamps when used with soft plastic hoses at 18 bar?

Twisted coupling for pneumatic hoses angle 90Â° with female thread, type C5/F: Based on the description, the design relies on pushing the soft plastic hose onto the fitting and securing it by screwing on the nut. At a working pressure of 18 bar, this push-on + nut arrangement alone is generally not sufficient to guarantee a leak- and blow-off-proof connection with soft plastic hoses. For safety and reliable operation at 18 bar, hose clamps (or crimp sleeves/specially designed clamp fittings) are recommended unless the manufacturer explicitly states the nut provides a tested, rated seal without additional clamps. Without such a manufacturerâs confirmation or certification for 18 bar, you should use appropriate hose clamps or approved crimp fittings rated for the hose material and pressure.

Twisted coupling for pneumatic hoses angle 90° with female thread, type C5/F

All products, Tubular fittings/

Additional information

Material	B – brass (bronze)

90° angled socket coupling with internal thread type C5/F designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MW-2352001	Angle connector (elbow) C5/F, hose 6/4, BSP thread 1/8	-	16	In stock	0 zł		Enquiry
MW-2352002	Angle connector (elbow) C5/F, hose 8/6, BSP thread 1/4	-	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° angled socket coupling with internal thread type C5/F designed for connecting hoses made of soft plastics. The connection is made by pushing the hose onto the fitting and tightening it by screwing on the nut. Material: nickel-plated brass. Working pressure: 18 bar.