Is the 90Â° angle end with sleeve, carbon steel, type FR102 compatible with hoses having a thermoplastic sleeve FR 5 DN4 (5/32") and internal UNF thread, SAE 45Â° cone?

Yes . the 90Â° angle end with sleeve, carbon steel, type FR102 is compatible with hoses having a thermoplastic sleeve FR 5 DN4 (5/32") and internal UNF thread, SAE 45Â° cone. Reasoning: - The 90Â° angle fitting description specifies a thermoplastic hose sleeve FR 5 DN4 (5/32"), matching the hose sleeve size. - The fitting uses an internal UNF thread with an SAE 45Â° cone seating, which matches the hose end specification. - Materials are compatible: fitting is carbon steel, galvanized; sleeve is aluminum; the hose uses a thermoplastic sleeve FR 5 . no material conflict for standard hydraulic/fluid applications. Ensure final assembly torque and sealing practice follow manufacturer specifications for UNF/SAE 45Â° cone connections to achieve proper sealing and avoid leaks. If operating pressures, temperatures, or chemical compatibility are critical, verify with technical datasheets.

Does the 90Â° angle end with sleeve, carbon steel, type FR102 accept thermoplastic hose sleeve FR 5 DN4 (5/32") with internal UNF thread and SAE 45Â° cone?

Yes. The 90Â° angle end with sleeve, carbon steel, type FR102 accepts the thermoplastic hose sleeve FR 5 DN4 (5/32") with internal UNF thread and SAE 45Â° cone - the description matches: 90Â° angle fitting with a thermoplastic hose sleeve FR 5 DN4 (5/32"), internal UNF thread, SAE 45Â° cone; fitting material carbon steel (galvanized), sleeve aluminum.

Can the 90Â° angle end with sleeve, carbon steel, type FR102 be used with thermoplastic hose sleeve FR 5 DN4 (5/32") having internal UNF thread and SAE 45Â° cone?

Yes. the 90Â° angle end with sleeve, carbon steel, type FR102 can be used with the thermoplastic hose sleeve FR 5 DN4 (5/32") that has an internal UNF thread and an SAE 45Â° cone, provided the following conditions are met: - Thread compatibility: The internal UNF thread of the FR 5 DN4 sleeve must match the external UNF thread size and pitch on the FR102 fitting. Confirm exact UNF size (e.g., 7/16â20, 9/16â18, etc.) to ensure proper engagement and sealing. - Seat compatibility: Both parts use an SAE 45Â° cone sealing surface. The cone angle and seating surfaces must be clean, undamaged, and correctly sized so that the 45Â° metal-to-metal cone joint can form a proper seal. - Material and galvanic considerations: The 90Â° angle end with sleeve, carbon steel, type FR102 is galvanized carbon steel; the FR 5 DN4 sleeve is aluminum. Direct aluminum-to-galvanized carbon steel contact can risk galvanic corrosion in certain environments. Use appropriate precautions (e.g., sealants, protective coatings, or isolation methods) if corrosion is a concern for the application and environment. - Pressure and application ratings: Ensure both componentsâ pressure ratings, temperature ranges, and media compatibility meet your system requirements. Thermoplastic hose sleeves may have different mechanical limits than metal fittings; verify recommended maximum pressures and any manufacturer restrictions. - Assembly and torque: Follow manufacturer torque and assembly instructions for UNF threaded 45Â° cone fittings to avoid under- or over-tightening, which could cause leaks or damage, especially given the aluminum sleeve. If the thread size/pitch and 45Â° cone dimensions match and environmental and pressure considerations are addressed, the 90Â° angle end with sleeve, carbon steel, type FR102 is compatible with the thermoplastic hose sleeve FR 5 DN4 (5/32") with internal UNF thread and SAE 45Â° cone.

90° angle end with sleeve, carbon steel, type FR102

Additional information

Material	CS – steel (cast iron)

90° angle fitting with a thermoplastic hose sleeve FR 5 DN4 (5/32″), with internal UNF thread, SAE type, 45° cone. Fitting material: carbon steel, galvanized. Sleeve material: aluminum.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
ZC-FR102-04-025	End. 90° G 1/4" SAE, 45° cone, hose 5/32", galvanized steel.	4	-	In stock	0 zł		Enquiry
ZC-FR102-06-025	End. 90° G 3/8" SAE, 45° cone, hose 5/32", galvanized steel.	4	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° angle fitting with a thermoplastic hose sleeve FR 5 DN4 (5/32″), with internal UNF thread, SAE type, 45° cone. Fitting material: carbon steel, galvanized. Sleeve material: aluminum.