Is the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® safe for continuous use at up to 2 bar and +76Â°C?

Yes. The 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® is specified for a working pressure up to 2 bar and an operating temperature up to +76Â°C, so it is rated as safe for continuous use at those exact conditions. Ensure that actual system pressure and fluid temperature do not exceed these limits, and inspect the acetal nozzle regularly for wear, chemical compatibility with the coolant, and any signs of deformation or cracking that could reduce safety.

Can the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® be used with fluids other than water at up to 2 bar and +76Â°C?

Yes - the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® is specified for working pressure up to 2 bar and operating temperature up to +76Â°C. It is made of acetal, which is chemically resistant to many common cutting fluids, coolants and light oils used in machining. However, compatibility depends on the specific fluidâs chemistry (solvents, strong acids/alkalis, chlorinated hydrocarbons or aggressive ketones can attack acetal). Before using fluids other than water, verify the fluidâs chemical compatibility with acetal and ensure temperature and pressure remain within the stated limits. If in doubt, consult the fluid manufacturer or test the nozzle with the intended fluid under actual conditions.

Does the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® require special mounting for acetal at 2 bar and +76Â°C?

No special mounting is required for the 90Â° flat nozzle with holes for coolant, 1/2" system, LOC-LINEÂ® when used at the specified conditions (2 bar and +76Â°C). The product description lists material as acetal, working pressure up to 2 bar, and operating temperature up to +76Â°C, so normal installation compatible with LOC-LINEÂ® coolant hoses and the 1/2" system is sufficient. Ensure connections are secure and compatible with LOC-LINEÂ® fittings; verify seals and hose condition routinely, but no additional special mounting or reinforcement is necessary within these limits.

90° flat nozzle with holes for coolant, 1/2″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

90° flat nozzle with holes for LOC-LINE® coolant hoses – 1/2″ system. 8 holes with a diameter of 4.3 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-59881	90° flat nozzle with holes 8x4.3 mm (1/2" system)	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° flat nozzle with holes for LOC-LINE® coolant hoses – 1/2″ system. 8 holes with a diameter of 4.3 mm. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.