Is the 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM compatible with food-grade and medical silicone hoses?

Format: 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM Yes . the 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM is compatible with food-grade and medical silicone hoses. The product description explicitly lists silicone among the intended hose materials (alongside PVC, PA, PUR, PTFE, FKM, and TYGONÂ®). The design targets laboratory, medical (e.g., dialysis), pharmaceutical and food industry applications, which implies suitability for hygienic and medical environments. Materials: body options in polypropylene or PVDF (both chemically resistant), and sealing with an FKM o-ring; working pressure up to 10 bar. Notes for safe use: - Ensure the specific silicone hose you plan to use is smooth-walled, unreinforced and flexible to match the couplingâs design. - Verify compatibility of FKM sealing with your medium and required regulatory standards for food/medical use; for some medical/food applications, specific elastomers (e.g., EPDM, silicone O-rings or FDA-compliant grades) may be required. - Confirm temperature and sterilization requirements (autoclave, steam, chemicals) against PP/PVDF and FKM limits.

Can the 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM be sterilized for use in medical and pharmaceutical applications?

90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM can be used in medical and pharmaceutical applications, including dialysis devices, as indicated in the description. Materials (PP or PVDF body, FKM Oâring) are commonly compatible with such uses, and the design allows repeated sterile connections. However, sterilizability depends on the chosen material: PVDF and PP tolerate many chemical sterilants and some thermal methods, but PP has lower highâtemperature resistance than PVDF; FKM Oâring is resistant to many chemicals but has limited steam autoclave compatibility. For validated medical/pharmaceutical use you must confirm the specific material grade, compatibility with your sterilization method (autoclave, gamma, EtO, chemical sterilants), and regulatory/cleanroom certifications from the manufacturer.

Does the 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM support use with PTFE and TYGONÂ® hoses?

Yes. The 90Â° swivel end for hose with GZ BSP plastic PP, PVDF, series 1A type EM Format supports use with PTFE and TYGONÂ® hoses. The product is designed for flexible, smoothâwalled, unreinforced hoses including PVC, PA, PUR, PTFE, FKM, silicone, and TYGONÂ®. The integrated sleeve and internal clamping ring in the knurled nut provide secure locking and allow reuse of the clamping ring. Materials: polypropylene or PVDF with FKM oâring sealing; working pressure: 10 bar.

Swivel 90° hose fitting with a BSP male thread of PP, PVDF plastic, 1A series type EM

All products, Low-pressure fittings and adapters/

Additional information

Material	P – material (plastic)

Swivel 90° hose fitting with a BSP male thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, which facilitates assembly, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Sealing: o-ring FKM. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EM-1A270MG4014PPFP	Fitting 90° swivel, compact (1A series) with 1/4" BSP male, hose 4x6 mm PP/FKM	4	10	In stock	Enquiry
EM-1A270MG4014PVFP	Fitting 90° swivel, compact (1A series) with 1/4" BSP male, hose 4x6 mm PVDF/FKM	4	10	In stock	Enquiry
EM-1A270MG4018PPFP	Fitting 90° swivel, compact (1A series) with 1/8" BSP male, hose 4x6 mm PP/FKM	4	10	In stock	Enquiry
EM-1A270MG4018PVFP	Fitting 90° swivel, compact (1A series) with 1/8" BSP male, hose 4x6 mm PVDF/FKM	4	10	In stock	Enquiry
EM-1A270MG4314PPFP	Fitting 90° swivel, compact (1A series) with 1/4" BSP male, hose 6x8 mm PP/FKM	6	10	In stock	Enquiry
EM-1A270MG4314PVFP	Fitting 90° swivel, compact (1A series) with 1/4" BSP male, hose 6x8 mm PVDF/FKM	6	10	In stock	Enquiry
EM-1A270MG4538PPFP	Fitting 90° swivel, compact (1A series) with 3/8" BSP male, hose 8x10 mm PP/FKM	8	10	In stock	Enquiry
EM-1A270MG4712PPFP	Fitting 90° swivel, compact (1A series) with 1/2" BSP male, hose 9x12 mm PP/FKM	8	10	In stock	Enquiry
EM-1A270MG4738PPFP	Fitting 90° swivel, compact (1A series) with 3/8" BSP male, hose 9x12 mm PP/FKM	8	10	In stock	Enquiry
EM-1A270MG4812PPFP	Fitting 90° swivel, compact (1A series) with 1/2" BSP male, hose 10x12 mm PP/FKM	10	10	In stock	Enquiry
EM-1A270MG4812PVFP	Fitting 90° swivel, compact (1A series) with 1/2" BSP male, hose 10x12 mm PVDF/FKM	10	10	In stock	Enquiry
EM-1A270MG4838PPFP	Fitting 90° swivel, compact (1A series) with 3/8" BSP male, hose 10x12 mm PP/FKM	10	10	In stock	Enquiry
EM-1A270MG4838PVFP	Fitting 90° swivel, compact (1A series) with 3/8" BSP male, hose 10x12 mm PVDF/FKM	10	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Swivel 90° hose fitting with a BSP male thread type EM, is widely used in laboratories, medicine (e.g. dialysis devices), and the pharmaceutical, chemical and food industries. It has an integrated sleeve, which facilitates assembly, and the hose is locked by means of a clamping ring located inside the knurled nut. Thanks to its flexibility, the clamping ring can be used several times in the same joint. It is intended for flexible, smooth-walled, unreinforced hoses made of PVC, PA, PUR, PTFE, FKM, silicone and TYGON® hoses. Other sizes and diameters of ends and connectors are available. Material: polypropylene, PVDF. Sealing: o-ring FKM. Working pressure: 10 bar.