Is the Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass suitable for steam up to 200Â°C and 25 bar?

Yes. The Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass is suitable for steam up to 200Â°C and 25 bar. The product specification explicitly lists steam among applicable media, a working pressure of 25 bar, and an operating temperature range up to +200Â°C (with Viton), and materials (brass body, stainless steel spring/balls) compatible with those conditions. Ensure the version you select (with or without valve) and any sealing material are Viton or otherwise rated for 200Â°C, and verify system compatibility and periodic inspection for steam service.

Can Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass be used with hot oil at 200Â°C and 25 bar?

Yes. Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass can be used with hot oil at 200Â°C and 25 bar. The product specs list compatibility with hot oil, a working pressure of 25 bar and an operating temperature range up to +200Â°C (with Viton), and construction materials (brass body, stainless steel spring/balls) suitable for such service. Ensure seals are Viton and regularly inspect for wear and compatibility with your specific oil type and system conditions.

Can Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass be used for circulating water in industrial cleaning machines?

Yes. Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass can be used for circulating water in industrial cleaning machines, with the following considerations: - Compatibility: The description explicitly states it "can be used for water in cleaning machines." Materials (brass body, stainless steel spring/ring/balls, Viton seals) are generally suitable for water service. - Pressure and flow: Flow diameter 6 mm and working pressure up to 25 bar are adequate for most cleaning-machine circulation systems; verify your systemâs operating pressure and required flow rate against these values. - Temperature: Operating range â20Â°C to +200Â°C (with Viton) covers typical hot-water cleaning; ensure your process temperature stays within this range. - Media limits: It also supports hot oil and steam per the description, but consider compatibility of brass and Viton with any chemical additives or highly corrosive waters (e.g., high chloride content) that could cause dezincification or seal degradation. - Installation/maintenance: Ensure proper assembly, secure connections, and periodic inspection for wear, seal aging, and corrosion. For steam at the upper temperature limits confirm valve and seal longevity under your duty cycle. - Safety: Confirm conformity with applicable industry standards and perform inâsystem testing before full-scale use. If your cleaning fluid is standard water (possibly hot) and system pressure/temperature are within the stated limits, Adaptor DN 6 quick-connect socket-plug, TST 060 series, brass is appropriate.

Adapter DN 6 quick coupling socket-plug, series TST 060, brass

Additional information

Material	B – brass (bronze)

Adapter quick coupling, socket DN 6 – plug DN 9, with valve or without valve. Widely used in industry for cooling injection and casting molds of plastic, aluminum, brass and zinc alloy parts. It can be used for water in cleaning machines, for hot oil, water vapor. Bore diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (Viton). Material: brass (body socket, connection, sleeve valve), steel stainless (spring, ring, balls).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FW-CSK060-AU090	Adapter socket 060 series / plug 090 series, with a valve	-	25	In stock	0 zł		Enquiry
FW-SK060-AU090	Adapter socket 060 series / plug 090 series, without valve	-	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Adapter quick coupling, socket DN 6 – plug DN 9, with valve or without valve. Widely used in industry for cooling injection and casting molds of plastic, aluminum, brass and zinc alloy parts. It can be used for water in cleaning machines, for hot oil, water vapor. Bore diameter: 6 mm. Working pressure: 25 bar. Operating temperature: from -20°C to +200°C (Viton). Material: brass (body socket, connection, sleeve valve), steel stainless (spring, ring, balls).