Is the AIR BOYÂ® NON SCRATCH air gun compliant with OSHA 1910.95(b) and EU directive 2003/10/EC regarding noise exposure?

Yes. The AIR BOYÂ® NON SCRATCH air gun is compliant with OSHA 1910.95(b) and EU Directive 2003/10/EC regarding noise exposure. Its declared sound intensity is 85 dB (at 8 bar), which meets typical workplace exposure limits referenced by those standards (usage and exposure duration should follow applicable hearing conservation measures).

Can the AIR BOYÂ® NON SCRATCH air gun's rubber nozzle prevent surface scratches and damage during use?

Yes. The AIR BOYÂ® NON SCRATCH air gunâs rubber nozzle (NBR) is specifically designed to protect sensitive surfaces-preventing scratches and damage while removing liquids, fine shavings, chips and other contaminants. Its rubber attachment cushions contact, and the lightweight, ergonomic body with a precise lever mechanism allows controlled airflow to minimize impact. Suitable materials and sealing, plus compliance with OSHA 1910.95(b) and EU directive 2003/10/EC, support safe use on delicate surfaces within the specified pressure and temperature ranges.

Does the AIR BOYÂ® NON SCRATCH air gun require special maintenance for its NBR seals and rubber nozzle?

AIR BOYÂ® NON SCRATCH air gun does not require any special or proprietary maintenance for its NBR seals and rubber nozzle beyond standard good-practice care. Recommended maintenance: - Inspect seals and rubber nozzle regularly for cuts, abrasion, hardening or chemical degradation. - Clean with mild soap and water or a soft cloth; avoid harsh solvents, ketones, strong acids or alkalis that can swell or degrade NBR. - Dry thoroughly before reassembly and storage. - Replace NBR seals or the rubber nozzle if you notice leaks, loss of flexibility, or visible damage. - Operate within specified limits (working pressure up to 16 bar, temperature range -10Â°C to +80Â°C) to avoid premature aging. - Protect from prolonged exposure to oils/chemicals not compatible with NBR and from direct sunlight/ozone where possible. Following these simple steps will keep the AIR BOYÂ® NON SCRATCH air gun functioning reliably without special maintenance procedures.

An air gun AIR BOY® NON SCRATCH

Air guns, All products/

Additional information

A gun with rubber nozzle (a nozzle) intended for removing with delicate surfaces all contamination: liquids, fine chips, filings itp. light construction and ergonomic shape ensure easy and convenient use. A gun equipped is in rubber nozzle (a nozzle), which protects sensitive surfaces against scratches and damage during use. mechanism the lever enables precision dosing flowing medium. compliant of the standard OSHA 1910.95 (b) and the directive 2003/10/EC. Material the body: acetal. Material nozzle / nozzle: steel galvanized / NBR. Sealing: NBR. pressure working: 16 bar. Operating temperature: from -10°C to +80°C. flow: 380 l/m (at a pressure of 8 bar). level sound: 85 dB (at a pressure of 8 bar). force blowing: 3.92 N.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JW-140020-000	Air gun AIR BOY NON SCRATCH, nozzle Ø8 mm straight L=100 mm, 1/4" BSP female	-	16	In stock	Enquiry
JW-140021-000	Air gun AIR BOY NON SCRATCH, nozzle Ø8 mm bent L=100 mm, 1/4" BSP female	-	16	In stock	Enquiry
JW-140023-000	Air gun AIR BOY NON SCRATCH, short nozzle Ø8 mm, 1/4" BSP female	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A gun with rubber nozzle (a nozzle) intended for removing with delicate surfaces all contamination: liquids, fine chips, filings itp. light construction and ergonomic shape ensure easy and convenient use. A gun equipped is in rubber nozzle (a nozzle), which protects sensitive surfaces against scratches and damage during use. mechanism the lever enables precision dosing flowing medium. compliant of the standard OSHA 1910.95 (b) and the directive 2003/10/EC. Material the body: acetal. Material nozzle / nozzle: steel galvanized / NBR. Sealing: NBR. pressure working: 16 bar. Operating temperature: from -10°C to +80°C. flow: 380 l/m (at a pressure of 8 bar). level sound: 85 dB (at a pressure of 8 bar). force blowing: 3.92 N.