Can the Air gun with standard nozzle, with regulating valve, aluminum be used safely with water at 8 bar and -5Â°C?

Yes. The Air gun with standard nozzle, with regulating valve, aluminum can be used safely with water at 8 bar and -5Â°C. Reasons: - The product spec states it "can be used with water." - Operating pressure range is 2â8 bar; 8 bar is within this limit (maximum pressure 10 bar). - Operating temperature range is â10Â°C to +50Â°C; â5Â°C is within this range. - Constructed of forged, anodized aluminum and equipped with a pressure-reducing (regulating) valve, supporting durability and controlled maximum flow for such applications. Notes/precautions: - Use the appropriate nozzle and connection (M12x1.25 thread or compatible accessory) and ensure seals and hoses are rated for water at 8 bar and low temperature. - Avoid freezing of residual water in the gun or feed lines; drain after use or use antifreeze measures if prolonged exposure to subzero conditions is expected. - Regularly inspect for wear, corrosion, or damage.

Is the Air gun with standard nozzle, with regulating valve, aluminum safe for prolonged use in wet conditions at 10 bar?

Air gun with standard nozzle, with regulating valve, aluminum Format - Yes, it is designed for use with water and for challenging, wet conditions. Made of forged anodized aluminum it offers high strength and corrosion resistance. It has a pressure-reducing valve to limit maximum flow, a standard interchangeable 1.5 mm nozzle, and a maximum pressure rating of 10 bar (recommended operating 2â8 bar). For prolonged wet use stay within the operating pressure and temperature range (â10Â°C to +50Â°C), rinse and dry threads/seals after use, and inspect seals and fittings periodically to maintain reliability and prevent corrosion-related wear.

Can the Air gun with standard nozzle, with regulating valve, aluminum be left connected to a wet hose overnight at 5 bar?

Air gun with standard nozzle, with regulating valve, aluminum. Yes, it can be left connected to a wet hose overnight at 5 bar, with some precautions. Why: The gun is made of forged anodized aluminum and explicitly states "Can be used with water", and its operating pressure range includes 5 bar (2â8 bar) with a maximum pressure of 10 bar. It is therefore designed to tolerate exposure to moisture and the specified pressure. Precautions: - Drain or isolate the hose if freezing temperatures (<0Â°C) are possible; operating temperature lower limit is â10Â°C but water inside may freeze and damage fittings. - If corrosive liquids or contaminants are present, flush and dry the gun after use to avoid internal corrosion or buildup. - For prolonged downtime, relieve pressure at the valve to avoid continuous stress on seals. - Ensure the hose and connections (EUROSTANDARD or hose end sizes) are compatible and leak-free to prevent water ingress into air supply or surrounding equipment. Conclusion: Leaving the Air gun with standard nozzle, with regulating valve, aluminum connected to a wet hose overnight at 5 bar is acceptable under normal conditions, provided you follow the precautions above.

Air gun with standard nozzle, with regulating valve, aluminum

Air guns, All products/

Additional information

High-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Equipped with a pressure reducing valve for adjusting maximum flow according to application. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish between a gun finished with a EUROSTANDARD 7.2 plug or a hose end with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (forging). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-26911E	Air gun, standard nozzle, hole diameter 1.5 mm, end 6 mm (valve)	-	10	In stock	Enquiry
EW-26917E	Air gun, standard nozzle, hole diameter 1.5 mm, end 9 mm (valve)	-	10	In stock	Enquiry
EW-26918E	Air gun, standard nozzle, hole diameter 1.5 mm, length 13 mm (valve)	-	10	In stock	Enquiry
EW-26941E	Air gun, standard nozzle, hole diameter 1.5 mm, plug DN 7.2 (valve)	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality aluminum compressed air gun designed for removing all contaminants from surfaces: liquids, fine chips, shavings, etc. Flow regulation by the degree of lever pressure. Equipped with a pressure reducing valve for adjusting maximum flow according to application. Made of forged aluminum, protected by anodizing, ensuring high strength, durability, and corrosion resistance. Can be used with water. Ideal for even the most challenging working conditions. The gun is equipped with a standard nozzle with a hole diameter of 1.5 mm, interchangeable, with an external connection thread M12x1.25. Instead of the standard nozzle, other nozzles can be installed – see EWO gun accessories. Depending on the connection, we distinguish between a gun finished with a EUROSTANDARD 7.2 plug or a hose end with diameters of 6 mm, 9 mm, and 13 mm. Material: aluminum (forging). Nozzle hole diameter: 1.5 mm. Maximum pressure: 10 bar. Operating pressure: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.