Is the ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F compatible with standard agricultural and construction hoses under working pressures of 5â19 bar?

Yes. The ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F is designed for hose use in agriculture, horticulture, industry, construction and related fields and specifies a working pressure range of 5â19 bar (depending on connection size). It uses galvanized steel construction and NR/SBR rubber sealing suitable for typical agricultural and construction applications and operating temperatures from â20Â°C to +50Â°C. Therefore, when matched to hoses rated for the same or higher working pressure and compatible connection size, it is compatible with standard agricultural and construction hoses operating within 5â19 bar. Ensure you verify the hoseâs rated working pressure, bore/connection size and material compatibility with NR/SBR before installation.

Can ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F maintain a leak-free seal with NR/SBR rubber at temperatures -20Â°C to +50Â°C?

Yes. ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F, with NR/SBR rubber sealing, is specified for an operating temperature range of -20Â°C to +50Â°C and working pressures from 5 to 19 bar (depending on size). Given those specifications, it is designed to maintain a leak-free seal with NR/SBR rubber throughout that temperature range when used within the stated pressure limits and installed/maintained per manufacturer guidelines. External factors (chemical exposure, abrasion, improper installation, or pressure spikes beyond rated values) could compromise sealing performance, so ensure compatibility with conveyed media and follow installation and maintenance recommendations.

Does ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F resist corrosion in saline or chemical-rich environments?

ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F offers basic corrosion protection due to its galvanized-steel construction, which provides a zinc coating that improves resistance to atmospheric corrosion and many common industrial and agricultural environments. However, based on the provided description, it is not specified as specially treated or rated for highly saline or aggressively chemical-rich conditions. Key points to consider: - Galvanization protects well against general corrosion, splash and rain, and many non-aggressive chemicals, but zinc coatings can corrode faster in continuous exposure to saltwater, high chloride environments (marine, de-icing salts) or strong acids/alkalis. - NR/SBR rubber sealing is suitable for many fluids but can degrade when exposed to strong solvents, oils, high-concentration acids or bases, and some aggressive chemicals and hydrocarbons. - Operating temperature range (â20Â°C to +50Â°C) and working pressure do not indicate enhanced chemical resistance. Conclusion: ANFOR 90Â° socket-to-hose coupling, galvanized steel, type A.26F will perform adequately in typical agricultural, horticultural and many industrial settings, but it should not be assumed corrosion-resistant for prolonged exposure to saline (marine) or highly chemical-rich environments without additional protection or confirmation from the manufacturer. For continuous saltwater or aggressive chemical service, consider stainless steel or chemically resistant coatings and verify compatibility of the NR/SBR seal with the specific chemicals.

ANFOR 90° socket-to-hose coupling, galvanized steel, type A.26F

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

ANFOR 90° connector socket with “tail” for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the connection). Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-A26F-90-150	ANFOR connector 90° socket - hose end 150 mm, galvanized steel.	150	12	In stock	Enquiry
OM-A26F-90-200	ANFOR connector 90° socket - hose end 200 mm, galvanized steel.	200	6	In stock	Enquiry
OM-A26F-90-250	ANFOR 90° connector socket - hose end 250 mm, galvanized steel.	250	5	In stock	Enquiry
OM-A26F-90-300	ANFOR 90° connector socket - hose end 300 mm, galvanized steel.	300	5	In stock	Enquiry
OM-A26F-90-400	ANFOR connector 90° socket - hose end 400 mm, galvanized steel.	400	5	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

ANFOR 90° connector socket with “tail” for hose use, among others, in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment plants, sewage discharge, environmental protection. Material: galvanized steel. Sealing: NR/SBR rubber. Working pressure: from 5 bar to 19 bar (depending on the size of the connection). Operating temperature: from -20°C to +50°C.