Can the Band-ItÂ® Standard and Junior strap mounting tool use bands wider than 3/4" or thicker than 0.76 mm, and is adapter BD-J00199 required for both models?

No. The Band-ItÂ® Standard and Junior strap mounting tool are limited to band widths from 1/4" to 3/4" and a maximum band thickness of 0.76 mm. Bands wider than 3/4" or thicker than 0.76 mm are not supported. If using the tool for both Band-ItÂ® Standard and Band-ItÂ® Junior applications, adapter BD-J00199 is required.

Does the Band-ItÂ® Standard and Junior strap mounting tool require adapter BD-J00199 to use bands between 1/4" and 3/4" wide and up to 0.76 mm thick?

Yes. The Band-ItÂ® Standard and Junior strap mounting tool requires adapter BD-J00199 to use bands between 1/4" and 3/4" wide and up to 0.76 mm thick.

Is adapter BD-J00199 needed to fit the Band-ItÂ® Standard and Junior strap mounting tool when using 1/4"â3/4" bands?

Yes. the adapter BD-J00199 is required. The Band-ItÂ® Standard and Junior strap mounting tool accepts bands 1/4"â3/4" (max thickness 0.76 mm), and when using this tool with those Band-ItÂ® models the BD-J00199 adapter must be used.

Band-It® Standard and Junior strap mounting tool

All products, Band clamping system/

Additional information

Device for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band and a spring-loaded grip for improved handling. Allowed band width: 1/4″ ÷ 3/4″. Maximum band thickness: 0.76 mm. Application: Band-It® Standard and Band-It® Junior – in this case, the use of adapter BD-J00199 is necessary.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
BD-C00189	Strapping machine (tensioner) for STANDARD tape 1/4" ÷ 3/4"	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Device for mounting steel bands of the Band-It® system with a built-in knife for cutting excess band and a spring-loaded grip for improved handling. Allowed band width: 1/4″ ÷ 3/4″. Maximum band thickness: 0.76 mm. Application: Band-It® Standard and Band-It® Junior – in this case, the use of adapter BD-J00199 is necessary.