Is the CAMLOCK D connector socket with female thread, stainless steel compatible with NPT and BSP pipe threads and what sizes support up to 10 bar working pressure?

CAMLOCK D connector socket with female thread, stainless steel is manufactured with internal BSP or NPT thread and is therefore compatible with both BSP and NPT pipe threads (female/internal thread version accepts male BSP or NPT counterparts). It is made to the American military standard MIL-C-27487 (A-A-59326) for transfer connections, widely used in petrochemical applications. Working pressure: the product specification states a working pressure up to 10 bar, depending on connector size. Typically, smaller sizes (commonly 1/2", 3/4" and 1") and many standard sizes up to 2" can be rated to the full 10 bar, while very large diameters may have lower ratings. Exact size-to-pressure capability should be confirmed with the manufacturerâs detailed pressure chart or technical datasheet for this CAMLOCK D connector socket with female thread, stainless steel (Material: AISI 316; Levers: AISI 304; Sealing: NBR).

Does the CAMLOCK D connector socket with female thread, stainless steel require special maintenance for AISI 316 body and AISI 304 levers to ensure 10 bar performance?

No special maintenance is required beyond standard good practice to preserve 10 bar performance for the CAMLOCK D connector socket with female thread, stainless steel. Key points: - Regular inspection: check body (AISI 316) and levers (AISI 304) for corrosion, pitting or damage. - Cleanliness: keep threads and sealing surfaces free of debris, deposits and chemical residues. - Seals: inspect NBR gasket for wear, hardening or cuts; replace if compromised. - Lubrication: apply compatible lubricant to threads and lever pivots if needed to prevent galling (use grease compatible with NBR and service media). - Torque and engagement: ensure proper mating and secure lever engagement per manufacturer guidance. - Environment: in highly corrosive or chloride-rich settings, increase inspection frequency due to risk to AISI 304 levers. Following these routine steps will help maintain rated performance up to 10 bar.

Can the CAMLOCK D connector socket with female thread, stainless steel be used for aggressive chemicals in petrochemical transfers?

It depends on the specific aggressive chemicals involved. CAMLOCK D connector socket with female thread, stainless steel offers good general corrosion resistance and is suitable for many petrochemical transfer applications, but compatibility must be confirmed caseâbyâcase. Why: - Construction: body in AISI 316 (316 stainless steel). good resistance to many acids, salts and organic chemicals; commonly used in petrochemical environments. Levers are AISI 304. less corrosion resistant than 316 and can be a weak point in highly corrosive or chlorideârich environments. - Sealing: NBR (nitrile). excellent for hydrocarbons, oils and many nonâpolar solvents, but limited for strong polar solvents, ketones (e.g., acetone), some aggressive acids, strong oxidizers and highâtemperature applications. NBR typically performs poorly with concentrated aromatics, chlorinated solvents and some amines. - Pressure/temperature: rated up to 10 bar (sizeâdependent). Elevated temperatures reduce NBR performance and may affect sealing integrity and pressure rating. Practical guidance: 1. Identify the exact chemicals, concentrations, temperatures and any mixtures or oxidizers. 2. Check AISI 316 compatibility charts for each chemical; watch for chlorides, HCl, H2S, strong oxidizers and halogenated solvents that can attack 316 or cause pitting/crevice corrosion. 3. Verify whether AISI 304 levers will be exposed to splashes or vapors. if so, consider full 316/316L hardware or protective coatings. 4. For seals, if NBR is incompatible, consider alternative elastomers (Viton/FPM, EPDM, PTFE, Kalrez) chosen for chemical and temperature resistance. 5. Confirm required pressure and temperature derating with the supplier/manufacturer for the chosen materials and service conditions. 6. For critical or hazardous transfers, request material certification, conduct compatibility testing or consult the connector manufacturer and safety/engineering teams. Conclusion: CAMLOCK D connector socket with female thread, stainless steel may be suitable for many petrochemical transfers, but for aggressive chemicals you must verify chemical compatibility of AISI 316, AISI 304 levers and NBR seals and replace materials if necessary.

CAMLOCK D connector socket with female thread, stainless steel

Additional information

Material	SS – stainless steel

CAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
AC-D-050-SS	CAMLOCK connector D 1/2", AISI 316	-	10
AC-D-050-SS-NPT	CAMLOCK connector D 1/2" NPT, AISI 316	-	10
AC-D-050-SSX	CAMLOCK connector D 1/2", AISI 316	-	10
AC-D-050-SSX-NPT	CAMLOCK connector D 1/2" NPT, AISI 316	-	10
AC-D-075-SS	CAMLOCK connector D 3/4", AISI 316	-	10
AC-D-075-SS-NPT	CAMLOCK connector D 3/4" NPT, AISI 316	-	10
AC-D-075-SSX	CAMLOCK connector D 3/4", AISI 316	-	10
AC-D-075-SSX-NPT	CAMLOCK connector D 3/4" NPT, AISI 316	-	10
AC-D-100-SS	CAMLOCK connector D 1", AISI 316	-	10
AC-D-100-SS-NPT	CAMLOCK connector D 1" NPT, AISI 316	-	10
AC-D-100-SSX	CAMLOCK connector D 1", AISI 316	-	10
AC-D-100-SSX-NPT	CAMLOCK connector D 1" NPT, AISI 316	-	10
AC-D-125-SS	CAMLOCK connector D 1.1/4", AISI 316	-	10
AC-D-125-SSX	CAMLOCK connector D 1.1/4", AISI 316	-	10
AC-D-150-SS	CAMLOCK connector D 1.1/2", AISI 316	-	10
AC-D-150-SSX	CAMLOCK connector D 1.1/2", AISI 316	-	10
AC-D-200-SS	CAMLOCK connector D 2", AISI 316	-	10
AC-D-200-SS-NPT	CAMLOCK connector D 2" NPT, AISI 316	-	10
AC-D-200-SSX	CAMLOCK connector D 2", AISI 316	-	10
AC-D-200-SSX-NPT	CAMLOCK connector D 2" NPT, AISI 316	-	10
AC-D-250-SS	CAMLOCK connector D 2.1/2", AISI 316	-	10
AC-D-250-SSX	CAMLOCK connector D 2.1/2", AISI 316	-	10
AC-D-300-SS	CAMLOCK connector D 3", AISI 316	-	10
AC-D-300-SSX	CAMLOCK connector D 3", AISI 316	-	10
AC-D-400-SS	CAMLOCK connector D 4", AISI 316	-	10
AC-D-400-SSX	CAMLOCK connector D 4", AISI 316	-	10
AC-D-500-SS	CAMLOCK connector D 5", AISI 316	-	9
AC-D-500-SSX	CAMLOCK connector D 5", AISI 316	-	9
AC-D-600-SS	CAMLOCK connector D 6", AISI 316	-	9
AC-D-600-SSX	CAMLOCK connector D 6", AISI 316	-	9

CAMLOCK D connector socket with internal BSP or NPT thread made according to the American military standard MIL-C-27487 (A-A-59326), commonly used as a transfer connection, particularly in the petrochemical industry. Working pressure: up to 10 bar, depending on the size of the connector. Material: AISI 316 steel. Levers: AISI 304 steel. Sealing: NBR.