Is the Car Wash Brush compatible with pressure washers up to 5 bar, and does the brass connection fit standard hoses?

Yes. Car Wash Brush is rated for working pressures up to 5 bar, so itâs compatible with pressure washers within that limit. The connection is made of brass, which fits standard hoses and offers a durable, reliable seal for typical car-washing setups. The headâs natural bristles and durable construction support washing tasks at the specified flow (60 l/min) and temperatures (up to +60Â°C).

Can the Car Wash Brushâs natural bristles withstand hot water up to +60Â°C without degrading?

Can the Car Wash Brushâs natural bristles withstand hot water up to +60Â°C without degrading? Yes. The Car Wash Brush is specified for an operating temperature up to +60Â°C, so its natural bristles are designed to tolerate hot water at that temperature without degradation under normal use. Ensure you follow the working pressure limit (up to 5 bar) and recommended flow rate (60 l/min) to avoid stressing the bristles or connection (brass).

Does the Car Wash Brushâs 60 l/min flow rate suit high-volume cleaning tasks with standard pressure washer setups?

Yes. the Car Wash Brushâs 60 l/min flow rate makes it suitable for many high-volume cleaning tasks when used with standard household and light professional pressure washer setups, but there are important caveats. Why it fits: - 60 liters per minute (â15.9 gallons/min) is a relatively high flow rate, enabling rapid rinsing and effective soap distribution across large surfaces (cars, vans, wheel wells, engine bays, etc.). - The brush is rated for working pressure up to 5 bar (â72.5 psi), which aligns with many consumer pressure washers or foam systems that operate at low-to-medium pressure while delivering higher flow for gentle, effective cleaning with natural bristles. - Brass connection and durable construction support repeated high-flow use and reliable coupling to compatible hoses or lance fittings. Limitations to consider: - Many common consumer pressure washers deliver lower flow (10â15 l/min), so you must ensure your machine or supply system can provide ~60 l/min; otherwise performance will be reduced. - The maximum working pressure is 5 bar; the brush is intended for low-pressure, high-flow cleaning. Itâs not suitable with high-pressure (>5 bar) washer settings. using higher pressure could damage bristles or connections and is unnecessary for safe car washing. - Water temperature limit (+60Â°C) means itâs fine for hot-water rinses up to that point but not for very hot industrial steam applications. Practical recommendation: Match the Car Wash Brush to a pressure washer or supply pump that can deliver around 60 l/min at up to 5 bar (or use a low-pressure high-flow foam/lance system). If your setup provides lower flow, use a lower-flow brush or accept slower coverage; if your system provides higher pressure, reduce pressure to avoid damage.

Car Wash Brush

All products, Guns for high-pressure washers/

Additional information

Material	P – material (plastic)

Brush without a handle made of durable material and natural bristles intended for washing cars and other components. Connection material: brass. Working pressure: up to 5 bar. Flow rate: 60 l/min. Operating temperature: up to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MH-260186	Brush 6 cm, GW 1/4", 0.5 MPa, 60°C	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Brush without a handle made of durable material and natural bristles intended for washing cars and other components. Connection material: brass. Working pressure: up to 5 bar. Flow rate: 60 l/min. Operating temperature: up to +60°C.