What maintenance is required for the Compressed air filter with reducer (filterreducer) FR, NEW DEAL series to ensure reliable pressure regulation and condensate drainage?

To ensure reliable pressure regulation and condensate drainage for the Compressed air filter with reducer (filterreducer) FR, NEW DEAL series, perform the following maintenance: - Regular inspection: visually check the unit, mounting, and connections for leaks, corrosion or damage. Verify the pressure gauge reading corresponds to set output pressure. - Drain condensate: operate the manual drain regularly or ensure semi-automatic (RMSA) / automatic (SAC) drains are functioning. For manual drains, open at intervals suitable to your moisture load; for RMSA/SAC, test operation and purge cycles periodically. - Clean or replace filter element: depending on contamination levels, remove and clean or replace the filter element to maintain flow rates (700 l/min for 1/4", 2500 l/min for 3/8" and 1/2" at inlet 6 bar, Îp =1 bar). - Check regulator operation: verify smooth piston movement and stable output pressure across the specified ranges (0â8 bar or 0â12 bar). Adjust setpoint and confirm the regulator holds pressure under load. - Verify supply limits: ensure inlet pressure does not exceed 18 bar and that drain RA applications do not exceed 10 bar. - Service fittings and threads: inspect BSP female threads (1/4", 3/8", 1/2" and gauge port 1/8") for sealing and retighten as needed. - Temperature considerations: confirm operating environment stays below +50Â°C to prevent degradation. - Scheduled preventive maintenance: establish intervals based on operating hours and contamination . more frequent in humid or dirty environments . and keep records of inspections, cleaning, and part replacements. These steps will help maintain reliable pressure regulation and effective condensate removal for the Compressed air filter with reducer (filterreducer) FR, NEW DEAL series.

Can the Compressed air filter with reducer (filterreducer) FR, NEW DEAL series be used continuously at inlet pressures up to 18 bar?

Yes. The Compressed air filter with reducer (filterreducer) FR, NEW DEAL series is specified for a supply (inlet) pressure up to 18 bar, so it can be used continuously at inlet pressures up to 18 bar. Note: the output (regulated) pressure ranges are 0â8 bar or 0â12 bar; for drain RA the maximum inlet for drain operation is 10 bar, and the deviceâs operating temperature limit is +50Â°C.

Compressed air filter with reducer (filterreducer) FR, NEW DEAL series

Q: How do I select the correct Compressed air filter with reducer (filterreducer) FR, NEW DEAL series size and condensate drain type for my system?

To select the correct Compressed air filter with reducer (filterreducer) FR, NEW DEAL series size and condensate drain type for your system, follow these steps: 1. Determine required flow: calculate peak/compressed air flow in l/min. Match to FR flow capacity: 700 l/min â 1/4", 2500 l/min â 3/8" or 1/2" (values given at 6 bar inlet, Îp=1 bar). 2. Check supply pressure and required output pressure: supply must be â¤18 bar (â¤10 bar if using RA drain). Choose output range 0â8 or 0â12 bar according to actuator needs. 3. Confirm operating temperature â¤ +50Â°C and BSP female thread size (1/4", 3/8", 1/2") for piping compatibility; gauge port is BSP 1/8". 4. Choose condensate drain type by accessibility and automation: manual for occasional draining, semi-automatic (RMSA) for reduced manual intervention, automatic (SAC) for continuous unattended operation (ensure SAC rated for your system pressure). 5. Mounting: provision for wall mounting via housing holes. Select size where flow capacity â¥ system demand and pick drain type based on maintenance preference and pressure limits.

Air preparation elements (FRL), All products/

Additional information

Maximum operating temperature [°C]	50
Standard length [m]	10, 100

Filter with a piston-type pressure regulator from the NEW DEAL series, featuring a high degree of reliability, intended for compressed air systems or in close proximity to actuating devices. Wall mounting capability via holes in the housing. Size: 1/4″, 3/8″, 1/2″. Output pressure range: 0 to 8, 0 to 12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4″, 3/8″, 1/2″. Pressure gauge connection: BSP female thread 1/8″. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min – 1/4″, 2500 l/min – 3/8″, 1/2″ (at an inlet pressure of 6 bar Δp = 1 bar).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]
MW-1225005	Filter - reducer FR 1/4 4 04 RMSA TMV (NEW DEAL)	-	-
MW-1225029	Filter - reducer FR 1/4 4 08 RMSA TMV (NEW DEAL)	-	-
MW-1225030	Filter - reducer FR 1/4 20 08 RMSA TMV (NEW DEAL)	-	-
MW-1225032	Filter - reducer FR 1/4 50 08 RMSA TMV (NEW DEAL)	-	-
MW-1225053	Filter - reducer FR 1/4 4 012 RMSA TMV (NEW DEAL)	-	-
MW-1225054	Filter - reducer FR 1/4 20 012 RMSA TMV (NEW DEAL)	-	-
MW-1225056	Filter - reducer FR 1/4 50 012 RMSA TMV (NEW DEAL)	-	-
MW-1225070	Filter - reducer FR 1/4 20 02 RMSA TMV (NEW DEAL)	-	-
MW-1225506	Filter - reducer FR 1/4 4 04 SAC TMV (NEW DEAL)	-	-
MW-1225509	Filter - reducer FR 1/4 4 08 SAC TMV (NEW DEAL)	-	-
MW-1225510	Filter - reducer FR 1/4 20 08 SAC TMV (NEW DEAL)	-	-
MW-1225511	Filter - reducer FR 1/4 50 08 SAC TMV (NEW DEAL)	-	-
MW-1225513	Filter - reducer FR 1/4 4 012 SAC TMV (NEW DEAL)	-	-
MW-1225514	Filter - reducer FR 1/4 20 012 SAC TMV (NEW DEAL)	-	-
MW-1225516	Filter - reducer FR 1/4 50 012 SAC TMV (NEW DEAL)	-	-
MW-1325029	Filter - reducer FR 3/8 4 08 RMSA TMV (NEW DEAL)	-	-
MW-1325030	Filter - reducer FR 3/8 20 08 RMSA TMV (NEW DEAL)	-	-
MW-1325032	Filter - reducer FR 3/8 50 08 RMSA TMV (NEW DEAL)	-	-
MW-1325053	Filter - reducer FR 3/8 4 012 RMSA TMV (NEW DEAL)	-	-
MW-1325054	Filter - reducer FR 3/8 20 012 RMSA TM TMV (NEW DEAL)	-	-
MW-1325056	Filter - reducer FR 3/8 50 012 RMSA TMV (NEW DEAL)	-	-
MW-1325500	Filter - reducer FR 3/8 4 04 SAC TMV (NEW DEAL)	-	-
MW-1325509	Filter - reducer FR 3/8 4 08 SAC TMV (NEW DEAL)	-	-
MW-1325510	Filter - reducer FR 3/8 20 08 SAC TMV (NEW DEAL)	-	-
MW-1325512	Filter - reducer FR 3/8 50 08 SAC TMV (NEW DEAL)	-	-
MW-1325513	Filter - reducer FR 3/8 4 012 SAC TMV (NEW DEAL)	-	-
MW-1325514	Filter - reducer FR 3/8 20 012 SAC TMV (NEW DEAL)	-	-
MW-1325516	Filter - reducer FR 3/8 50 012 SAC TMV (NEW DEAL)	-	-
MW-1425005	Filter - reducer FR 1/2 4 04 RMSA TMV (NEW DEAL)	-	-
MW-1425029	Filter - reducer FR 1/2 4 08 RMSA TMV (NEW DEAL)	-	-
MW-1425030	Filter - reducer FR 1/2 20 08 RMSA TMV (NEW DEAL)	-	-
MW-1425032	Filter - reducer FR 1/2 50 08 RMSA TMV (NEW DEAL)	-	-
MW-1425033	Filter - reducer FR 1/2 4 08 RA TMV (NEW DEAL)	-	-
MW-1425053	Filter - reducer FR 1/2 4 012 RMSA TMV (NEW DEAL)	-	-
MW-1425054	Filter - reducer FR 1/2 20 012 RMSA TMV (NEW DEAL)	-	-
MW-1425056	Filter - reducer FR 1/2 50 012 RMSA TMV (NEW DEAL)	-	-
MW-1425058	Filter - reducer FR 1/2 20 012 RA TMV (NEW DEAL)	-	-
MW-1425509	Filter - reducer FR 1/2 4 08 SAC TMV (NEW DEAL)	-	-
MW-1425510	Filter - reducer FR 1/2 20 08 SAC TMV (NEW DEAL)	-	-
MW-1425512	Filter - reducer FR 1/2 50 08 SAC TMV (NEW DEAL)	-	-
MW-1425513	Filter - reducer FR 1/2 4 012 SAC TMV (NEW DEAL)	-	-
MW-1425514	Filter - reducer FR 1/2 20 012 SAC TMV (NEW DEAL)	-	-
MW-1425516	Filter - reducer FR 1/2 50 012 SAC TMV (NEW DEAL)	-	-

Filter with a piston-type pressure regulator from the NEW DEAL series, featuring a high degree of reliability, intended for compressed air systems or in close proximity to actuating devices. Wall mounting capability via holes in the housing. Size: 1/4″, 3/8″, 1/2″. Output pressure range: 0 to 8, 0 to 12 bar. Supply pressure: up to 18 bar, for drain RA up to 10 bar. Operating temperature: up to +50°C. Connection: BSP female thread 1/4″, 3/8″, 1/2″. Pressure gauge connection: BSP female thread 1/8″. Condensate drain: manual / semi-automatic (RMSA), automatic (SAC). Flow rate: 700 l/min – 1/4″, 2500 l/min – 3/8″, 1/2″ (at an inlet pressure of 6 bar Δp = 1 bar).