Compressed air fine filter D 100 – 200 – 300, with end plates, SKILLAIR® series
SKILLAIR® D series filter, with end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/4″ to 1″. Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min – size 100, 360 l/min – size 200, 500 l/min – size 300 (at inlet pressure 6 bar Δp = 1 bar).
List of product variants
Do you need a larger quantity of products or a bespoke quote?
SKILLAIR® D series filter, with end plates, is used for the precise removal of liquid and solid contaminants contained in compressed air. Size: 100, 200, 300. Filtration degree: 99.97% at 0.01 µm. Supply pressure: up to 15 bar, depending on size and type of discharge. Operating temperature: up to +50°C. Connection: BSP 1/4″ to 1″. Condensate discharge: manual / semi-automatic (RMSA), automatic (SAC, RA). Flow rate: 230 l/min – size 100, 360 l/min – size 200, 500 l/min – size 300 (at inlet pressure 6 bar Δp = 1 bar).
Additional information
| Maximum operating temperature [°C] | 50 |
|---|
