Can Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® acetal fittings withstand continuous use at 3 bar and +76Â°C?

Yes. Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® acetal fittings are specified for a working pressure up to 3 bar and an operating temperature up to +76Â°C, so they can withstand continuous use at 3 bar and +76Â°C within those stated limits. Ensure installation follows manufacturer guidelines and consider system transients, chemical compatibility, and any safety margins for prolonged service.

Can Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® acetal fittings be used with fluids other than coolant at up to 3 bar and +76Â°C?

Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® Format is specified as an NPT 1/8" or 1/4" external threaded connection made from acetal, with a working pressure up to 3 bar and an operating temperature up to +76Â°C. These ratings are based on use as a coolant fitting; suitability for other fluids depends on chemical compatibility with acetal and on pressure/temperature conditions. Key points to determine suitability: - Chemical compatibility: Acetal (POM) is generally resistant to water, oils, and many hydrocarbons, but can be attacked by strong acids, strong bases, ketones (e.g., acetone), chlorinated solvents, and some aromatics. Check the specific fluid against an acetal compatibility chart. - Temperature and pressure: The part is rated to max +76Â°C and up to 3 bar. If your fluid and system stay within these limits under all operating conditions (including transients), mechanical integrity is likely acceptable. - Seals and system components: If the fluid contacts other seals or components (O-rings, tubing), verify their compatibility as well. - Safety and regulations: For hazardous, aggressive, potable, or food-contact fluids, confirm regulatory suitability and consider using fittings designed for those services. - Application specifics: Consider swelling, permeation, long-term exposure, and cyclic loading; some fluids can cause gradual degradation below obvious failure thresholds. Conclusion: Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® Format can be used with fluids other than coolant only if those fluids are chemically compatible with acetal and the system never exceeds 3 bar and +76Â°C. For any aggressive, hazardous, or regulated fluids, or if in doubt, consult the manufacturerâs chemical compatibility data or choose a fitting material rated for the intended fluid and conditions.

Coolant connection with NPT GZ, 1/4″ system, LOC-LINE®

Q: Is the Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® compatible with acetal fittings for use up to 3 bar and +76Â°C?

Yes. The Coolant connection with NPT GZ, 1/4" system, LOC-LINEÂ® is compatible with acetal fittings for use up to 3 bar and +76Â°C. The description specifies an NPT 1/8" or 1/4" external threaded connection for LOC-LINEÂ® coolant (1/4" system), material acetal, working pressure up to 3 bar, and operating temperature up to +76Â°C, which matches the stated limits for acetal fittings.

Air and water hoses, All products/

Additional information

Material	P – material (plastic)

NPT 1/8″ or 1/4″ external threaded connection for LOC-LINE® coolant – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-49425	Connection with GZ NPT 1/8" (system 1/4")	-	3	In stock	0 zł		Enquiry
LL-49426	Connection with GZ NPT 1/4" (system 1/4")	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

NPT 1/8″ or 1/4″ external threaded connection for LOC-LINE® coolant – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +76°C.