Is the Coolant connection with GZ NPT, 3/4" system, JETON made of acetal suitable for continuous use at 1.4 bar and +65Â°C?

Yes. The Coolant connection with GZ NPT, 3/4" system, JETON made of acetal is specified for a working pressure up to 1.4 bar and an operating temperature up to +65Â°C, so it is suitable for continuous use at 1.4 bar and +65Â°C provided the application does not exceed those limits. Ensure the installation avoids aggressive chemicals or environments that could degrade acetal, and verify compatibility with your coolant fluid and any cyclic or peak pressure/temperature events.continuous exposure within the stated ratings is acceptable.

Can the Coolant connection with GZ NPT, 3/4" system, JETON made of acetal withstand occasional pressure spikes above 1.4 bar at +65Â°C?

Coolant connection with GZ NPT, 3/4" system, JETON is specified for a working pressure up to 1.4 bar at an operating temperature up to +65Â°C. Occasional pressure spikes above the rated 1.4 bar exceed the declared working pressure and therefore cannot be guaranteed safe. Acetal has good mechanical properties, but the manufacturer rating defines the safe limit; exceeding it may cause deformation, leaks or sudden failure, especially at elevated temperature. If occasional spikes are unavoidable, consult the manufacturer for transient pressure tolerance or use a higher-rated component or pressure relief/protection to ensure safety.

Does the Coolant connection with GZ NPT, 3/4" system, JETON resist chemical exposure common in coolant fluids?

Coolant connection with GZ NPT, 3/4" system, JETON: The connection is made of acetal (POM), which offers good mechanical strength, low moisture absorption and reasonable chemical resistance to many hydrocarbons, oils and some coolants. However, acetal is not universally resistant: it can be attacked or swollen by strong acids, strong bases, chlorinated solvents, ketones (e.g., acetone), and certain aggressive chemical additives. Typical water-based coolants and conventional synthetic or semi-synthetic coolant fluids used in machining usually are compatible with acetal at temperatures up to +65Â°C and pressures up to 1.4 bar, provided the coolant formulation does not contain aggressive solvents or highly alkaline/acidic components. Conclusion: Coolant connection with GZ NPT, 3/4" system, JETON will resist chemical exposure common in many standard waterâbased and oilâbased coolant fluids, but compatibility must be confirmed for specific coolant formulationsâespecially if they contain strong acids, strong alkalis, chlorinated solvents, ketones or other aggressive additives. If in doubt, consult the coolant MSDS and perform compatibility testing or choose a connector material specified for aggressive chemistries.