Is the Coupler with GW BSP, brass, type 3410 suitable for both hot and cold water systems at operating temperatures -10Â°C to +100Â°C and pressure up to 10 bar?

Yes. The Coupler with GW BSP, brass, type 3410 is specified as an internal threaded BSP coupling for pipe connections including hot and cold water installations, made of brass, with an operating temperature range of -10Â°C to +100Â°C and a working pressure of 10 bar, so it is suitable for use in hot and cold water systems within those temperature and pressure limits.

Does Coupler with GW BSP, brass, type 3410 comply with potable water standards for hot/cold systems at -10Â°C to +100Â°C and 10 bar?

Based on the provided description, Coupler with GW BSP, brass, type 3410 is described for use in pipe connections for hot and cold water installations, made of brass, with an operating temperature range of â10Â°C to +100Â°C and working pressure of 10 bar. This indicates it is physically suitable for the stated temperature and pressure conditions. However, compliance with potable water standards (e.g., NSF/ANSI 61, WRAS, ACS) depends on material certification, lead content limits and manufacturer certification not specified in the description. Therefore, while Coupler with GW BSP, brass, type 3410 meets the listed temperature/pressure requirements, confirmation of potable-water approval requires documented certifications from the manufacturer.

Can Coupler with GW BSP, brass, type 3410 be used in residential plumbing for hot/cold water within -10Â°C to +100Â°C at 10 bar?

Yes. Coupler with GW BSP, brass, type 3410 is suitable for residential plumbing for hot and cold water within the stated range. The product description explicitly lists BSP internal threaded coupling for use in pipe connections such as hot and cold water installations, is made of brass, and specifies an operating temperature range of -10Â°C to +100Â°C with a working pressure of 10 bar. These parameters match typical residential system requirements, so it can be used provided installation follows applicable local codes and proper thread sealing and fittings are applied.

Coupler with GW BSP, brass, type 3410

Additional information

Material	B – brass (bronze)

BSP internal threaded coupling for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-3410-04	Coupling with G1/4" BSP, brass	-	10	In stock	Enquiry
RV-3410-06	Coupling with G 3/8" BSP, brass	-	10	In stock	Enquiry
RV-3410-08	Coupling with G 1/2" BSP, brass	-	10	In stock	Enquiry
RV-3410-12	Coupling with G 3/4" BSP, brass	-	10	In stock	Enquiry
RV-3410-16	1" BSP threaded coupling, brass	-	10	In stock	Enquiry
RV-3410-20	Coupling with G1/4" BSP, brass	-	10	In stock	Enquiry
RV-3410-24	Coupling with GW BSP 1.1/2", brass	-	10	In stock	Enquiry
RV-3410-32	2" BSP threaded coupling, brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

BSP internal threaded coupling for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.