Can DIN 3015 double insert, polypropylene, type 301 withstand continuous use between -30Â°C and +90Â°C?

Yes. DIN 3015 double insert, polypropylene, type 301 is specified with an operating temperature range from -30Â°C to +90Â°C, so it is intended to withstand continuous use within that temperature interval. The material (green polypropylene) and the stated operating temperature in the product description indicate suitability for persistent service across those temperatures. Ensure that application-specific factors (mechanical loads, chemical exposure, UV, and mounting conditions) do not introduce stresses beyond the materialâs limits.if such factors are present, verify with supplier data sheets or perform application testing.

Is DIN 3015 double insert, polypropylene, type 301 suitable for use with grooved pipe openings?

Yes. DIN 3015 double insert, polypropylene, type 301 is suitable for use with grooved pipe openings. The product description states it is a two-part insert for clamp DIN 3015 type 301 made to the DIN 3015 standard and standardly features a profiled (grooved) surface for the pipe opening. Made of green polypropylene and rated for operation from â30Â°C to +90Â°C, it is designed to interface with grooved pipe surfaces and provide proper fit and protection within the clamp.

Can DIN 3015 double insert, polypropylene, type 301 resist exposure to UV or sunlight over time?

DIN 3015 double insert, polypropylene, type 301 is made of polypropylene (green) and rated for operating temperatures from â30Â°C to +90Â°C. Standard polypropylene offers moderate resistance to weathering but is not inherently UV-stabilized unless additives (UV stabilizers, carbon black, etc.) are incorporated. Practical implications: - Short-term or occasional sunlight exposure: the material will perform acceptably without rapid degradation. - Prolonged, continuous UV/sunlight exposure: untreated polypropylene typically undergoes photo-oxidation, leading over time to surface chalking, loss of mechanical properties (brittleness, reduced impact resistance) and potential embrittlement or cracking. The rate depends on intensity of UV, temperature cycles, and environmental factors. - Service life: without explicit UV stabilizers specified, expect gradual degradation over months to years under strong sunlight; in moderate climates the timeframe will be longer. - Mitigation: for long-term outdoor use, verify whether the specific DIN 3015 double insert, polypropylene, type 301 batch includes UV stabilizers or choose inserts formulated for UV resistance (or provide protective shielding, paint, or cover to block direct sunlight). Conclusion: Unless the product is specifically specified or treated for UV resistance, DIN 3015 double insert, polypropylene, type 301 will not reliably resist prolonged UV/sunlight exposure over long periods and may degrade; for long-term outdoor applications, request UV-stabilized material or protective measures.

DIN 3015 double insert, polypropylene, type 301

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

Two-part insert for clamp DIN 3015 type 301 made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-PP301-106,4X	DIN3015 double PP insert for 6.4 mm pipes	-	-	In stock	Enquiry
TC-PP301-106X	DIN3015 double PP insert for 6 mm pipes	-	-	In stock	Enquiry
TC-PP301-108X	DIN3015 double PP insert for 8 mm pipes	-	-	In stock	Enquiry
TC-PP301-109,5X	DIN3015 double PP insert for 9.5 mm pipes	-	-	In stock	Enquiry
TC-PP301-110X	DIN3015 double PP insert for 10 mm pipes	-	-	In stock	Enquiry
TC-PP301-112X	DIN3015 double PP insert for 12 mm pipes	-	-	In stock	Enquiry
TC-PP301-212,7X	DIN3015 double PP insert for 12.7 mm pipes	-	-	In stock	Enquiry
TC-PP301-213,5X	DIN3015 double PP insert for 13.5 mm pipes	-	-	In stock	Enquiry
TC-PP301-214X	DIN3015 double PP insert for 14 mm pipes	-	-	In stock	Enquiry
TC-PP301-215X	DIN3015 double PP insert for 15 mm pipes	-	-	In stock	Enquiry
TC-PP301-216X	DIN3015 double PP insert for 16 mm pipes	-	-	In stock	Enquiry
TC-PP301-217,2X	DIN3015 double PP insert for pipes 17.2 mm	-	-	In stock	Enquiry
TC-PP301-218X	DIN3015 double PP insert for 18 mm pipes	-	-	In stock	Enquiry
TC-PP301-319X	DIN3015 double PP insert for 19 mm pipes	-	-	In stock	Enquiry
TC-PP301-320X	DIN3015 double PP insert for 20 mm pipes	-	-	In stock	Enquiry
TC-PP301-321,3X	DIN3015 double PP insert for pipes 21.3 mm	-	-	In stock	Enquiry
TC-PP301-322X	DIN3015 double PP insert for 22 mm pipes	-	-	In stock	Enquiry
TC-PP301-325,4X	DIN3015 double PP insert for pipes 25.4 mm	-	-	In stock	Enquiry
TC-PP301-325X	DIN3015 double PP insert for 25 mm pipes	-	-	In stock	Enquiry
TC-PP301-426,9X	DIN3015 double PP insert for pipes 26.9 mm	-	-	In stock	Enquiry
TC-PP301-428X	DIN3015 double PP insert for 28 mm pipes	-	-	In stock	Enquiry
TC-PP301-430X	DIN3015 double PP insert for 30 mm pipes	-	-	In stock	Enquiry
TC-PP301-532X	DIN3015 double PP insert for 32 mm pipes	-	-	In stock	Enquiry
TC-PP301-533,7X	DIN3015 double PP insert for pipes 33.7 mm	-	-	In stock	Enquiry
TC-PP301-535X	DIN3015 double PP insert for 35 mm pipes	-	-	In stock	Enquiry
TC-PP301-538X	DIN3015 double PP insert for 38 mm pipes	-	-	In stock	Enquiry
TC-PP301-540X	DIN3015 double PP insert for 40 mm pipes	-	-	In stock	Enquiry
TC-PP301-542,4X	DIN3015 double PP insert for pipes 42.4 mm	-	-	In stock	Enquiry
TC-PP301-542X	DIN3015 double PP insert for 42 mm pipes	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Two-part insert for clamp DIN 3015 type 301 made according to DIN 3015 standard. Standardly features a profiled (grooved) surface for the pipe opening. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.