What are the temperature and material specifications of the DIN 3015 standard cartridge polypropylene type 101 insert?

DIN 3015 standard cartridge, polypropylene, type 101: Material . green polypropylene insert. Operating temperature range . -30Â°C to +90Â°C.

Can DIN 3015 standard cartridge, polypropylene, type 101 inserts be used with non-metallic or composite pipes?

Yes. DIN 3015 standard cartridge, polypropylene, type 101 inserts can be used with non-metallic or composite pipes, provided the pipe diameter matches the insert size group and the application conditions fall within the insertâs capabilities. The profiled (grooved) surface offers secure grip on plastic or composite outer surfaces, and the green polypropylene material is suitable for temperatures from â30Â°C to +90Â°C. Ensure the correct number and position of screw holes for the chosen size group (one for group 0, two for groups 1â6) and verify mechanical loads, chemical compatibility and specific standards or customer requirements for the non-metallic/composite pipe before final selection.

Can DIN 3015 standard cartridge, polypropylene, type 101 inserts be used with chemically aggressive fluids?

DIN 3015 standard cartridge, polypropylene, type 101 Format is made of green polypropylene and rated for operating temperatures from -30Â°C to +90Â°C. Polypropylene offers good chemical resistance to many nonâpolar solvents, alkalis, and some acids, but its resistance varies with specific chemicals, concentration, temperature and exposure time. Therefore, whether it can be used with chemically aggressive fluids depends on the exact fluid and conditions: - Likely compatible: diluted alkaline solutions, many hydrocarbons, fats and oils, and some organic solvents at moderate concentrations and temperatures within the stated range. - Possibly incompatible or caution required: strong oxidizers (e.g., concentrated nitric or sulfuric acids), chlorinated hydrocarbons, aromatic solvents, ketones (e.g., acetone), and some aggressive acids/bases or concentrated solutions, especially at elevated temperatures or long exposure. - Mechanical and dimensional performance may degrade with aggressive chemicals even if shortâterm compatibility seems acceptable. Recommendation: confirm compatibility by checking the chemical resistance data for polypropylene against the specific fluid, concentration and temperature. For safety and reliability in aggressive chemical environments, consider consulting the manufacturer or selecting an insert made from a chemically resistant material (e.g., PTFE, PVDF) if required.

DIN 3015 standard cartridge, polypropylene, type 101

All products, Clamps for hydraulic pipes/

Additional information

Material	P – material (plastic)

Two-part insert for DIN 3015 type 101 clamp made according to DIN 3015 standard. For size group 0, there is one hole for a screw; for size groups 1 to 6, there are two holes for screws. It standardly features a profiled (grooved) surface for the pipe. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TC-PP101-006X	DIN3015 standard PP insert for 6 mm pipe	-	-	In stock	Enquiry
TC-PP101-008X	DIN3015 standard PP insert for 8 mm pipe	-	-	In stock	Enquiry
TC-PP101-010X	DIN3015 standard PP insert for 10 mm pipe	-	-	In stock	Enquiry
TC-PP101-012X	DIN3015 standard PP insert for 12 mm pipe	-	-	In stock	Enquiry
TC-PP101-106,4X	DIN3015 standard PP insert for 6.4 mm pipe	-	-	In stock	Enquiry
TC-PP101-106X	DIN3015 standard PP insert for 6 mm pipe	-	-	In stock	Enquiry
TC-PP101-108X	DIN3015 standard PP insert for 8 mm pipe	-	-	In stock	Enquiry
TC-PP101-109,5X	DIN3015 standard PP insert for 9.5 mm pipe	-	-	In stock	Enquiry
TC-PP101-110X	DIN3015 standard PP insert for 10 mm pipe	-	-	In stock	Enquiry
TC-PP101-112X	DIN3015 standard PP insert for 12 mm pipe	-	-	In stock	Enquiry
TC-PP101-212,7X	DIN3015 standard PP insert for 12.7 mm pipe	-	-	In stock	Enquiry
TC-PP101-213,5X	DIN3015 standard PP insert for 13.5 mm pipe	-	-	In stock	Enquiry
TC-PP101-214X	DIN3015 standard PP insert for 14 mm pipe	-	-	In stock	Enquiry
TC-PP101-215X	DIN3015 standard PP insert for 15 mm pipe	-	-	In stock	Enquiry
TC-PP101-216X	DIN3015 standard PP insert for 16 mm pipe	-	-	In stock	Enquiry
TC-PP101-217,2X	DIN3015 standard PP insert for 17.2 mm pipe	-	-	In stock	Enquiry
TC-PP101-218X	DIN3015 standard PP insert for 18 mm pipe	-	-	In stock	Enquiry
TC-PP101-219X	DIN3015 standard PP insert for 19 mm pipe	-	-	In stock	Enquiry
TC-PP101-319X	DIN3015 standard PP insert for 19 mm pipe	-	-	In stock	Enquiry
TC-PP101-320X	DIN3015 standard PP insert for 20 mm pipe	-	-	In stock	Enquiry
TC-PP101-321,3X	DIN3015 standard PP insert for 21.3 mm pipe	-	-	In stock	Enquiry
TC-PP101-322X	DIN3015 standard PP insert for 22 mm pipe	-	-	In stock	Enquiry
TC-PP101-325,4X	DIN3015 standard PP insert for 25.4 mm pipe	-	-	In stock	Enquiry
TC-PP101-325X	DIN3015 standard PP insert for 25 mm pipe	-	-	In stock	Enquiry
TC-PP101-426,9X	DIN3015 standard PP insert for 26.9 mm pipe	-	-	In stock	Enquiry
TC-PP101-428X	DIN3015 standard PP insert for 28 mm pipe	-	-	In stock	Enquiry
TC-PP101-430X	DIN3015 standard PP insert for 30 mm pipe	-	-	In stock	Enquiry
TC-PP101-432X	DIN3015 standard PP insert for 32 mm pipe	-	-	In stock	Enquiry
TC-PP101-532X	DIN3015 standard PP insert for 32 mm pipe	-	-	In stock	Enquiry
TC-PP101-533,7X	DIN3015 standard PP insert for 33.7 mm pipe	-	-	In stock	Enquiry
TC-PP101-535X	DIN3015 standard PP insert for 35 mm pipe	-	-	In stock	Enquiry
TC-PP101-538X	DIN3015 standard PP insert for 38 mm pipe	-	-	In stock	Enquiry
TC-PP101-540X	DIN3015 standard PP insert for 40 mm pipe	-	-	In stock	Enquiry
TC-PP101-542,4X	DIN3015 standard PP insert for 42.4 mm pipe	-	-	In stock	Enquiry
TC-PP101-542X	DIN3015 standard PP insert for 42 mm pipe	-	-	In stock	Enquiry
TC-PP101-545X	DIN3015 standard PP insert for 45 mm pipe	-	-	In stock	Enquiry
TC-PP101-644,5X	DIN3015 standard PP insert for 44.5 mm pipe	-	-	In stock	Enquiry
TC-PP101-648,3X	DIN3015 standard PP insert for 48.3 mm pipe	-	-	In stock	Enquiry
TC-PP101-650,8X	DIN3015 standard PP insert for 50.8 mm pipe	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Two-part insert for DIN 3015 type 101 clamp made according to DIN 3015 standard. For size group 0, there is one hole for a screw; for size groups 1 to 6, there are two holes for screws. It standardly features a profiled (grooved) surface for the pipe. Insert material: green polypropylene. Operating temperature: from -30°C to +90°C.