DIN 3016 mounting clamp RUBBER P-CLIP, strap width 20 mm, carbon steel

, /
DIN 3016 mounting clamp RUBBER P-CLIP, strap width 20 mm, carbon steel

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping mounting of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (flange). Strip width: 20 mm.

List of product variants

Article numberProduct variant nameNominal inner diameterWorking pressure [bar]Enquiry
AB-03005510RUBBER P-CLIP clamp 11 mm, width 20 mm, W1--
AB-03005528RUBBER P-CLIP clamp 12 mm, width 20 mm, W1--
AB-03005536RUBBER P-CLIP clamp 13 mm, width 20 mm, W1--
AB-03005544RUBBER P-CLIP clamp 14 mm, width 20 mm, W1--
AB-03005552RUBBER P-CLIP clamp 15 mm, width 20 mm, W1--
AB-03005560RUBBER P-CLIP clamp 16 mm, width 20 mm, W1--
AB-03005579RUBBER P-CLIP clamp 18 mm, width 20 mm, W1--
AB-03005587RUBBER P-CLIP clamp 19 mm, width 20 mm, W1--
AB-03005595RUBBER P-CLIP clamp 20 mm, width 20 mm, W1--
AB-03005608RUBBER P-CLIP clamp 21 mm, width 20 mm, W1--
AB-03005616RUBBER P-CLIP clamp 22 mm, width 20 mm, W1--
AB-03005624RUBBER P-CLIP clamp 23 mm, width 20 mm, W1--
AB-03005632RUBBER P-CLIP clamp 24 mm, width 20 mm, W1--
AB-03005640RUBBER P-CLIP clamp 25 mm, width 20 mm, W1--
AB-03005667RUBBER P-CLIP clamp 27 mm, width 20 mm, W1--
AB-03005675RUBBER P-CLIP clamp 28 mm, width 20 mm, W1--
AB-03005683RUBBER P-CLIP clamp 29 mm, width 20 mm, W1--
AB-03005691RUBBER P-CLIP clamp 30 mm, width 20 mm, W1--
AB-03005712RUBBER P-CLIP clamp 32 mm, width 20 mm, W1--
AB-03005739RUBBER P-CLIP clamp 34 mm, width 20 mm, W1--
AB-03005747RUBBER P-CLIP clamp 35 mm, width 20 mm, W1--
AB-03005755RUBBER P-CLIP clamp 36 mm, width 20 mm, W1--
AB-03005771RUBBER P-CLIP clamp 38 mm, width 20 mm, W1--
AB-03005798RUBBER P-CLIP clamp 40 mm, width 20 mm, W1--
AB-03005819RUBBER P-CLIP clamp 42 mm, width 20 mm, W1--
AB-03005843RUBBER P-CLIP clamp 45 mm, width 20 mm, W1--
AB-03005878RUBBER P-CLIP clamp 48 mm, width 20 mm, W1--
AB-03005894RUBBER P-CLIP clamp 50 mm, width 20 mm, W1--
AB-03005915RUBBER P-CLIP clamp 52 mm, width 20 mm, W1--
AB-03005940RUBBER P-CLIP clamp 55 mm, width 20 mm, W1--
AB-03005990RUBBER P-CLIP clamp 60 mm, width 20 mm, W1--
AB-03006029RUBBER P-CLIP clamp 63 mm, width 20 mm, W1--
AB-03006045RUBBER P-CLIP clamp 65 mm, width 20 mm, W1--
AB-03006096RUBBER P-CLIP clamp 70 mm, width 20 mm, W1--
AB-03006117RUBBER P-CLIP clamp 72 mm, width 20 mm, W1--
AB-03006141RUBBER P-CLIP clamp 75 mm, width 20 mm, W1--
AB-03006168RUBBER P-CLIP clamp 77 mm, width 20 mm, W1--
AB-03006192RUBBER P-CLIP clamp 80 mm, width 20 mm, W1--
AB-03006248RUBBER P-CLIP clamp 85 mm, width 20 mm, W1--
AB-03006299RUBBER P-CLIP clamp 90 mm, width 20 mm, W1--
AB-03007163RUBBER P-CLIP clamp 110 mm, width 20 mm, W1--
DIN 3016 mounting clamp RUBBER P-CLIP, strap width 20 mm, carbon steel

RUBBER P-CLIP clamp compliant with DIN 3016 standard recommended for safe and vibration-damping mounting of pipes, hoses, hose bundles, corrugated electrical installation pipes (hose sheaths), etc., for which there is a risk of abrasion and damage. This type of clamp has wide applications, including: agricultural and construction machinery, internal combustion engine construction, railway industry, electrical equipment, household appliances, etc. It is made from a single piece of bent steel strip and a rubber flange. The holes at both ends of the strip are reinforced with steel plates, ensuring resistance to compression under high mechanical loads. The strip is made of galvanized carbon steel (W1), and the profile is made of EPDM rubber resistant to water, abrasion, temperature changes, and aging. The clamp does not include a screw, washer, or nut. Material: galvanized carbon steel (strip), EPDM rubber (flange). Strip width: 20 mm.

Additional information

Material

CS – steel (cast iron)

Additional information

Material

CS – steel (cast iron)

Catalogue
Download

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY