Can the DN 6 quick connect plug with hose end, TST 060 series, brass withstand 25 bar pressure when used with water, hot oil, or steam?

Yes. The DN 6 quick connect plug with hose end, TST 060 series, brass is rated for a working pressure of 25 bar and is specified for use with water, hot oil and steam. Constructed of brass and designed for industrial applications (cooling injection molds, casting parts, cleaning machines), it has a 6 mm flow diameter and is intended to withstand the stated 25 bar working pressure when used with those media. Ensure correct installation, hose and mating coupling compatibility, and observe temperature limits and regular inspection for safe operation.

Is the DN 6 quick connect plug with hose end, TST 060 series, brass suitable for use with steam at high temperatures?

Yes. The DN 6 quick connect plug with hose end, TST 060 series, brass is indicated for use with steam and hot fluids (hot oil) according to the product description. Key specs: 6 mm flow diameter, 25 bar working pressure, brass plug body. Before final use, verify that your specific steam temperature and pressure do not exceed the material and seal limits (brass and any internal seals/gaskets), and confirm compatibility with your systemâs steam quality and safety requirements. If operating near the maximum pressure or at very high temperatures, consult the manufacturer for confirmation and recommended seals.

Does the DN 6 quick connect plug with hose end, TST 060 series, brass require specific seals for hot oil applications?

Yes. for hot oil applications you should use high-temperature seals with the DN 6 quick connect plug with hose end, TST 060 series, brass. Although the product description states it âcan be used for water in cleaning machines, hot oil, and steam,â standard elastomer seals (e.g., typical NBR) may degrade, swell, or harden under prolonged exposure to elevated oil temperatures and certain hydraulic fluids. To ensure reliable sealing, longevity and safety at high temperatures: - Specify seals rated for the expected oil temperature and compatibility with the particular oil type (e.g., silicone, fluorocarbon/VitonÂ®, EPDM for some oils, or PTFE-based seals where chemical resistance and heat are critical). - Confirm maximum continuous temperature rating of the chosen seal is above the operating temperature of your hot oil system. - Check chemical compatibility charts for the specific oil or additives in use. - Consider seal hardness and compression set characteristics to maintain leak-free performance under 25 bar working pressure. In short: DN 6 quick connect plug with hose end, TST 060 series, brass can be used with hot oil, but you must fit seals specifically selected for high-temperature oil service.

DN 6 quick connect plug with hose end, TST 060 series, brass

Additional information

Material	B – brass (bronze)

DN 6 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass (plug body).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
FW-060-HU06	DN 6 plug with end for 6 mm hose, without valve	6	25	In stock	Enquiry
FW-060-HU08	DN 6 plug with end for 8 mm hose, without valve	8	25	In stock	Enquiry
FW-060-HU09	DN 6 plug with end for 9 mm hose, without valve	8	25	In stock	Enquiry
FW-060-HU10	DN 6 plug with end for 10 mm hose, without valve	10	25	In stock	Enquiry
FW-060-HU13	DN 6 plug with end for 13 mm hose, without valve	12	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 6 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 6 mm. Working pressure: 25 bar. Material: brass (plug body).