Is the DN 9 quick-connect plug with hose end, TST 090 series, brass compatible with steam and hot oil at 25 bar working pressure?

Yes. The DN 9 quick-connect plug with hose end, TST 090 series, brass is specified for use with water, hot oil, and steam and has a rated working pressure of 25 bar. Constructed from brass and with a 9 mm flow diameter, it is marketed for industrial applications including cooling injection molds and casting parts, and explicitly notes compatibility with hot oil and steam. Ensure that the actual system temperature, steam quality (wet/dry), and any chemical additives are within brass material limits and that installation follows pressureâtemperature ratings and safety standards for steam and hot oil systems.

Can DN 9 quick-connect plug with hose end, TST 090 series, brass be used for circulating water in injection-mold cooling systems?

Yes. The DN 9 quick-connect plug with hose end, TST 090 series, brass is suitable for circulating water in injection-mold cooling systems. Itâs explicitly described as widely used for cooling injection molds and casting parts and can be used for water in cleaning machines. With a 9 mm flow diameter, 25 bar working pressure, and brass body, it meets typical cooling circuit demands. Ensure compatibility with your specific hose fittings, temperature range, and any seals or valves in your system before installation.

Can the DN 9 quick-connect plug with hose end, TST 090 series, brass be used for cleaning machines with high-temperature water?

Yes. The DN 9 quick-connect plug with hose end, TST 090 series, brass can be used for cleaning machines with highâtemperature water. The product description explicitly states it is suitable for water in cleaning machines and for steam and hot oil, indicating compatibility with elevated temperatures. Key specs supporting this use: - Flow diameter: 9 mm. allows good flow for cleaning applications. - Working pressure: 25 bar. adequate for most highâpressure cleaning systems. - Material: brass (plug body). brass withstands typical highâtemperature cleaning fluids and steam better than many plastics. Important considerations before use: - Verify the actual temperature and pressure in your cleaning machine do not exceed the connectorâs limits (steam can imply higher temperatures/pressures. confirm safe operating range with supplier if exact temperature not specified). - Ensure any seals or hoses attached are rated for the same high temperatures and pressures. - Regularly inspect for wear, corrosion or seal degradation when used with hot water/steam. If you need, provide the exact temperature and pressure of your cleaning process and Iâll confirm suitability more precisely.

DN 9 quick-connect plug with hose end, TST 090 series, brass

Additional information

Material	B – brass (bronze)

DN 9 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Material: brass (plug body).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
FW-090-HU10	DN 9 plug with end for 10 mm hose, without valve	10	25	In stock	0 zł		Enquiry
FW-090-HU13	DN 9 plug with end for 13 mm hose, without valve	12	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DN 9 quick coupling plug with hose end, without valve, widely used in the industry for cooling injection molds and casting parts made of plastics, aluminum, brass, and zinc alloys. Can be used for water in cleaning machines, hot oil, and steam. Flow diameter: 9 mm. Working pressure: 25 bar. Material: brass (plug body).