Can the PIV electric diverter valve, for wire installation, operate reliably at pressures up to 30 bar and temperatures from -15Â°C to +50Â°C?

Yes. The PIV electric diverter valve, for wire installation, is specified for a maximum working pressure range up to 30 bar (depending on valve and coil type) and an operating temperature range of â15Â°C to +50Â°C. It is designed for use with filtered compressed air (oiled or non-oiled), supports high-frequency operation and short response times, and can be installed in any position. Therefore, when the selected valve/coil variant supports the 30 bar rating, the PIV electric diverter valve, for wire installation, will operate reliably within the stated pressure and temperature limits.

Does the PIV electric diverter valve, for wire installation, require oiling of the compressed air for reliable high-frequency operation?

No. The PIV electric diverter valve, for wire installation, is specified for use with filtered compressed air, oiled or non-oiled, and is suitable for high-frequency operation and short response times. Therefore oiling the compressed air is not required for reliable high-frequency operation, though following general best practices for air quality and lubrication per system manufacturer recommendations is advisable.

Is the PIV electric diverter valve, for wire installation, suitable for use with both GW M5 and GW BSP1/8â connection threads?

Yes. The PIV electric diverter valve, for wire installation is specified with connection thread options GW M5 and GW BSP1/8â, so it is suitable for use with either GW M5 or GW BSP1/8â threaded connections. The valve body is aluminum, can be installed in any position, and is designed for filtered compressed air (oiled or non-oiled) with operating temperature â15Â°C to +50Â°C and maximum working pressure depending on valve/coils (6â30 bar).

PIV electric diverter valve, for wire installation

All products, Pneumatic valves/

Additional information

Maximum operating temperature [°C]	50
Minimum operating temperature [°C]	-15

Electric dividing valve, without control coil PIV for wired installation. It is a pneumatic component whose task is to control the direction of flow of the working medium in pneumatic drive and control systems by connecting or switching flow paths. Suitable for operation with high frequency and short response times. Possible installation in any position. Valve body material: aluminum. Connection thread: GW M5, GW BSP1/8”. Working medium: filtered compressed air, oiled or non-oiled. Maximum working pressure: from 6 bar to 30 bar, depending on the type of valve and coil. Operating temperature: -15°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W4017000100	PIV42 I5S NC valve, without coil, 8 mm stem, M5 thread	-	30	In stock	Enquiry
MW-W4017000101	PIV72 I5S NO valve, without coil, 8 mm stem, M5 thread	-	10	In stock	Enquiry
MW-W4017001100	PIV42 I8S NC valve, without coil, 8 mm stem, BSP 1/8" thread	-	30	In stock	Enquiry
MW-W4017001200	PIV72 I8S NC valve, without coil, 8 mm stem, BSP 1/8" thread	-	14	In stock	Enquiry
MW-W4017001201	PIV72 I8S NO valve, without coil, 8 mm stem, BSP 1/8" thread	-	10	In stock	Enquiry
MW-W4017001300	PIV92 I8S NC valve, without coil, 8 mm stem, BSP 1/8" thread	-	6	In stock	Enquiry
MW-W4017003100	PIV43 I5S NC valve, without coil, 8 mm stem, M5 thread	-	10	In stock	Enquiry
MW-W4017004100	PIV43 I8S NC valve, without coil, 8 mm stem, BSP 1/8" thread	-	10	In stock	Enquiry
MW-W4017004200	PIV73 I8S NC valve, without coil, 8 mm stem, BSP 1/8" thread	-	6.5	In stock	Enquiry
MW-W4017004201	PIV73 I8S NO valve, without coil, 8 mm stem, BSP 1/8" thread	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Electric dividing valve, without control coil PIV for wired installation. It is a pneumatic component whose task is to control the direction of flow of the working medium in pneumatic drive and control systems by connecting or switching flow paths. Suitable for operation with high frequency and short response times. Possible installation in any position. Valve body material: aluminum. Connection thread: GW M5, GW BSP1/8”. Working medium: filtered compressed air, oiled or non-oiled. Maximum working pressure: from 6 bar to 30 bar, depending on the type of valve and coil. Operating temperature: -15°C to +50°C.