Is EWO pneumatic tool oil compatible with all pneumatic system seals and materials across -20Â°C to +80Â°C?

Short answer: No . EWO pneumatic tool oil is not guaranteed compatible with all pneumatic system seals and materials across -20Â°C to +80Â°C. Explanation: EWO pneumatic tool oil is formulated for pneumatic equipment per DIN 51 524â2, VG 32, and includes surfactants for corrosion protection over the -20Â°C to +80Â°C temperature range. Those properties address lubrication and corrosion inhibition, but compatibility with seals, hoses, plastics, elastomers and other non-metal components depends on the specific material (e.g., NBR, FKM/Viton, EPDM, PTFE, polyurethane) and formulation. Some elastomers swell, harden or degrade when exposed to certain base oils, additives or temperature extremes. Because the product description does not list tested materials or compatibility data, you should: - Check manufacturer compatibility charts or request material compatibility data from the supplier. - Perform a small-scale compatibility test (immersion, swelling, hardness, and function) on the actual seal materials at the expected temperature extremes. - Consider specifying oils with explicit seal-material approval if your system uses sensitive elastomers or polymers. In short: EWO pneumatic tool oil may be suitable for many pneumatic systems, but you must verify compatibility with your specific seal materials and operating temperatures before widespread use.

Does EWO pneumatic tool oilâs corrosion protection perform equally at -20Â°C and +80Â°C in long-term storage?

Based on the specification, EWO pneumatic tool oilâs corrosion protection is formulated to be effective across the stated temperature range (-20Â°C to +80Â°C). The surfactants in EWO pneumatic tool oil are intended to provide protection over that wide range, so in long-term storage you can expect corrosion protection to remain effective at both -20Â°C and +80Â°C, provided the product is stored in its recommended sealed packaging (1 l or 5 l) and protected from contamination and extreme thermal cycling beyond those limits.

Can EWO pneumatic tool oil be safely used in food processing pneumatic systems?

EWO pneumatic tool oil should not be used in food processing pneumatic systems unless it has explicit food-grade certification. The product description. âSpecial oil for lubrication and maintenance of pneumatic equipment according to DIN 51 524 â 2 with a viscosity class of VG 32 (according to ISO 3448). This oil contains surfactants that provide corrosion protection over a wide temperature range from -20Â°C to +80Â°C. Packaging: 1 l, 5 l.â. does not state any food-contact approvals (e.g., NSF H1, ISO 21469, FDA 21 CFR) or indicate that ingredients are safe for incidental contact with food. Surfactants and additive packages used for corrosion protection can include substances not permitted in food environments. For food processing applications you must use lubricants explicitly rated for incidental food contact and compliant with applicable standards. If you need to consider EWO pneumatic tool oil, request from the manufacturer material safety data, a declaration of conformity for food-contact use, and any relevant certifications. Without those, do not assume EWO pneumatic tool oil is safe for food-processing pneumatic systems.

Oil for tools pneumatic EWO

All products, Oils and greases/

Additional information

Special oil for lubrication and maintenance equipment pneumatic in accordance with the standard DIN 51 524 – 2 with class viscosity VG 32 (in accordance with the standard ISO 3448). oil ten contains substances surface active, which ensure protection against corrosion in wide the scope temperatures od -20°C up to +80°C. packaging: 1 l, 5 l.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-583	Olej for tools pneumatycznych (poj. 1 l)	-	-	In stock	0 zł		Enquiry
EW-5831	Olej for tools pneumatycznych (poj. 5 l)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Special oil for lubrication and maintenance equipment pneumatic in accordance with the standard DIN 51 524 – 2 with class viscosity VG 32 (in accordance with the standard ISO 3448). oil ten contains substances surface active, which ensure protection against corrosion in wide the scope temperatures od -20°C up to +80°C. packaging: 1 l, 5 l.