Is the FERRARI lever connector socket with male thread, carbon steel, type F.14 suitable for use in wastewater treatment and sewage disposal systems?

Yes. The FERRARI lever connector socket with male thread, carbon steel, type F.14 is described for use in wastewater treatment and sewage disposal systems. Its carbon steel, galvanized construction provides mechanical strength and corrosion resistance suitable for such applications, and the NRâSBR rubber sealing offers chemical and water-tight performance across the stated operating temperature range (â20Â°C to +50Â°C). Provided the specific wastewater chemistry, pressure and temperature conditions of your installation fall within the productâs documented limits and any applicable local standards, the FERRARI lever connector socket with male thread, carbon steel, type F.14 is suitable for wastewater treatment and sewage disposal use.

Can the FERRARI lever connector socket with male thread, carbon steel, type F.14 withstand outdoor agricultural and construction environments?

Yes. The FERRARI lever connector socket with male thread, carbon steel, type F.14 is designed for outdoor agricultural and construction environments. It is specified for use in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, wastewater treatment, sewage disposal and environmental protection. Made of galvanized carbon steel with NRâSBR rubber sealing, it resists typical outdoor and utility exposures and operates between â20Â°C and +50Â°C, covering common temperature ranges for these applications. Regular inspection and maintenance are advised for prolonged service in aggressive or highly corrosive conditions.

Does the FERRARI lever connector socket with male thread, carbon steel, type F.14 resist corrosion in saline or acidic environments?

The FERRARI lever connector socket with male thread, carbon steel, type F.14 is galvanized carbon steel with NRâSBR rubber sealing and an operating temperature range of â20Â°C to +50Â°C. Galvanization provides a protective zinc layer that offers good general corrosion resistance, including improved resistance to moisture and many nonâextreme environments. However, galvanized carbon steel is not inherently highly resistant to aggressive saline (saltwater) or strongly acidic environments. Salt (chloride) accelerates corrosion and can lead to zinc layer breakdown and undercutting, while acidic conditions can attack both the zinc coating and the steel substrate, reducing service life. The NRâSBR rubber seal resists many common conditions but is not specifically formulated as a longâterm barrier against strong acids or concentrated saline immersion. Conclusion: The FERRARI lever connector socket with male thread, carbon steel, type F.14 may tolerate occasional exposure to mild saline or mildly acidic environments, but it is not designed for prolonged, continuous, or highly aggressive saline or acidic conditions. For longâterm use in marine, highâsalinity, or strongly acidic environments, consider stainless steel or specially coated materials and seals rated for such conditions.

A FERRARI lever coupling socket with a thread external, steel carbon, type F.14

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

A FERRARI lever coupling socket with a thread external BSP, type F.14, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-F14-048-150	Socket FERRARI 48 mm with 1.1/2" male	-	10	In stock	Enquiry
OM-F14-060-200	Socket FERRARI 60 mm with 2" male	-	10	In stock	Enquiry
OM-F14-080-300	Socket FERRARI 80 mm with 3" male	-	9	In stock	Enquiry
OM-F14-100-250	Socket FERRARI 100 mm with 2.1/2" male	-	8	In stock	Enquiry
OM-F14-100-400	Socket FERRARI 100 mm with 4" male	-	8	In stock	Enquiry
OM-F14-120-250	Socket FERRARI 120 mm with 2.1/2" male	-	7	In stock	Enquiry
OM-F14-120-300	Socket FERRARI 120 mm with 3" male	-	7	In stock	Enquiry
OM-F14-120-500	Socket FERRARI 120 mm with 5" male	-	7	In stock	Enquiry
OM-F14-150-600	Socket FERRARI 150 mm with 6" male	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A FERRARI lever coupling socket with a thread external BSP, type F.14, for use among others in agriculture, horticulture, industry, construction, road and tunnel building, groundwater drainage, sewage treatment plants, wastewater discharge, and environmental protection. Material: steel carbon, galvanized. Sealing: rubber NR-SBR. Operating temperature: from -20°C to +50°C.