Is the Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® suitable for continuous use at 2 bar and +76Â°C?

Yes. The Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® is specified for a working pressure up to 2 bar and an operating temperature up to +76Â°C, so it is suitable for continuous use at 2 bar and +76Â°C provided those conditions do not exceed the stated limits and the application does not introduce additional stresses (chemical exposure, mechanical wear, vibration, or pressure/temperature spikes). Ensure installation avoids pressure/temperature transients above the specified ratings and verify compatibility of any coolant with acetal. If your process may produce higher pressures, temperatures above +76Â°C, or aggressive chemicals, seek a higher-rated material or component.

Can the Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® be used with fluids other than water at up to 2 bar?

Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® is made of acetal, rated for working pressure up to 2 bar and operating temperature up to +76Â°C. While the specification names "coolant" and lists water-like operating conditions, acetal is chemically resistant to many common fluids (coolants, light oils, antifreeze solutions) but can be attacked by strong acids, bases, chlorinated hydrocarbons and some solvents. Therefore you can use fluids other than water only if they are compatible with acetal and do not exceed 2 bar or +76Â°C. If you plan to use aggressive chemicals, hot fluids near the temperature limit, or unknown mixtures, verify chemical compatibility with acetal or consult the manufacturer before use.

Does the Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® resist chemical cleaners at temperatures up to +76Â°C?

Yes. The Flat nozzle with adjustable head with holes for coolant, 1/2" system, LOC-LINEÂ® is made of acetal and is rated for an operating temperature up to +76Â°C. Acetal (POM) has good chemical resistance to many common cleaners and coolants at temperatures within that range, so the nozzle will resist typical chemical cleaners when used at or below +76Â°C. However, resistance can vary with specific chemicals (strong acids, strong bases, chlorinated solvents, and some aggressive solvents may attack acetal), so for exposure to aggressive or concentrated chemical cleaners you should verify compatibility with the specific cleaner manufacturer or consult a chemical compatibility chart before prolonged use.

Flat nozzle with adjustable head with holes for coolant, 1/2″ system, LOC-LINE®

Air and water hoses, All products/

Additional information

Flat nozzle with adjustable head with holes (20 holes) of diameter Ø 1.9 mm for LOC-LINE® coolant hoses – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
LL-59895	Flat nozzle with holes 20x1.9 mm (1/2" system)	-	2	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Flat nozzle with adjustable head with holes (20 holes) of diameter Ø 1.9 mm for LOC-LINE® coolant hoses – 1/2″ system. Material: acetal. Working pressure: up to 2 bar. Operating temperature: up to +76°C.