Can the Flexible rubber suction and discharge hose for water and wastewater, AMBURGO, handle pumping sludge and manure at temperatures down to -30Â°C?

Yes. Flexible rubber suction and discharge hose for water and wastewater, AMBURGO is specified for an operating temperature range from -30Â°C to +70Â°C and is designed for transport of sludge and manure. Its smooth inner synthetic rubber layer is resistant to sludge and sewage, and the hose construction (synthetic cord/steel spiral reinforcement and corrugated outer layer) supports use in agricultural and industrial applications including manure handling. Ensure fittings and installation (steel bands, clamps, brackets, or compression sleeves) are appropriate for lowâtemperature operation and the required working pressure (3 bar).

Is the Flexible rubber suction and discharge hose for water and wastewater, AMBURGO, suitable for use with solids-laden slurries and slurry pumps?

Flexible rubber suction and discharge hose for water and wastewater, AMBURGO is primarily designed for water, sewage, sludge, nonâcorrosive liquids and natural fertilizers and is suitable for use with solidsâladen slurries to a limited extent. Its smooth SBR inner layer, steel spiral reinforcement and 3 bar working pressure make it appropriate for suction/discharge of sludge and sewage and for use with slurry pumps in agricultural applications (e.g., manure, septic tank emptying). However, heavy, abrasive or highly concentrated slurries containing large solids or sharp particles may accelerate wear and reduce service life; for such applications a hose specifically rated for high abrasion and larger solids content is recommended. Operating range: -30Â°C to +70Â°C.

Can the Flexible rubber suction and discharge hose for water and wastewater, AMBURGO, be used for air extraction and dust collection?

Yes. Flexible rubber suction and discharge hose for water and wastewater, AMBURGO can be used for air extraction and dust collection. Although primarily designed for water, sewage, sludge and nonâcorrosive liquids, its construction. smooth inner SBR rubber, synthetic cord and steel spiral reinforcement, and corrugated outer layer. makes it suitable for handling air, dust and bulk materials as indicated in the product description. Working pressure (3 bar) and temperature range (â30Â°C to +70Â°C) support typical extraction and dustâcollection applications. Installation should follow recommended fittings for the hose diameter (steel bands, clamps, brackets or compression sleeves) and consider abrasion from abrasive dusts, potential static buildup (take grounding/antiâstatic measures if required), and compatibility with the specific dust or particulate being handled. For heavy abrasive solids or explosive/flammable dusts, verify suitability with the manufacturer or choose a hose specifically rated for those hazards.

Flexible rubber suction – delivery hose for water and sewage, AMBURGO

Air and water hoses, All products/

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	60
Reinforcement	steel spiral, synthetic cover

Pliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-AMBURGO-025	Hose AMBURGO 25 mm	25	3	In stock	Enquiry
IV-AMBURGO-051	Hose AMBURGO 51 mm	50	3	In stock	Enquiry
IV-AMBURGO-076	Hose AMBURGO 76 mm	75	3	In stock	Enquiry
IV-AMBURGO-102	Hose AMBURGO 102 mm	100	3	In stock	Enquiry
IV-AMBURGO-203	Hose AMBURGO 203 mm	200	3	In stock	Enquiry
IV-AMBURGO-254	Hose AMBURGO 254 mm	250	3	In stock	Enquiry
IV-AMBURGO-305	Hose AMBURGO 305 mm	300	3	In stock	Enquiry
IV-AMBURGO-350	Hose AMBURGO 350 mm	350	3	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Pliable, light and strong hose suction-delivery intended for conveying water, sewage, sludge, liquids non-corrosive, fertilisers natural (slurry). Layer inner with smooth rubber synthetic, resistant to sludge and sewage. corrugated Layer outer ensures small radius bends and is resistant to ozone, conditions atmospheric and aging. intended for applications agricultural, construction and industrial, used for emptying septic tanks, as hose suction for pumps water and sewage, for dewatering and irrigation, for tankers. can be used for extraction air, dust and for bulk materials. assembly – depending on the diameter and type fittings using bands steel, straps, clamps or ferrule clamping. Inner layer: black synthetic rubber (SBR). Reinforcement: cord synthetic, steel spiral. Outer layer: black corrugated synthetic rubber. Working pressure: 3 bar. Operating temperature: od -30°C up to +70°C.

Additional information

Material	SBR – styrene-butadiene rubber
Maximum operating temperature [°C]	70
Minimum operating temperature [°C]	-30
Vacuum resistance	yes
Standard length [m]	60
Reinforcement	steel spiral, synthetic cover