Is the Foam lance with nozzle (nozzle type AK-NOZ50200 - 65Â°), plug DN11.8, stainless steel compatible with AKBO gun fittings and safe to use with the white nylon cover?

Yes . the Foam lance with nozzle, plug DN11.8, stainless steel is compatible with AKBO gun fittings and safe to use with the white nylon cover, provided a few basic checks: - Compatibility: The inlet specification plug DN11.8 matches the AKBO gun fitting standard used for these guns, so it will connect securely when the AKBO gun expects a DN11.8 plug. - Materials and durability: The lance body is stainless steel, which is appropriate for pressure washer/foam-lance service and compatible with AKBO gun systems. The white nylon cover is a protective sheath only and does not affect the mechanical connection. - Safety and use: The nylon cover provides insulation and protection for the nozzle and helps prevent accidental contact; it is safe for normal foam application. Ensure the cover is intact (no tears) and properly fitted before use. - Operational notes: Use the Foam lance with nozzle lengths (22, 50, or 60 cm) appropriate for reach and leverage with your AKBO gun. Verify pressure and chemical compatibility (detergents/foaming agents) with stainless steel and nylon per manufacturer guidance. Tighten the DN11.8 connection hand-tight plus any recommended turn; avoid cross-threading. Conclusion: The Foam lance with nozzle, plug DN11.8, stainless steel is compatible with AKBO gun fittings and safe to use with the white nylon cover when properly connected and used within recommended pressure and chemical limits.

Can the Foam lance with nozzle, plug DN11.8, stainless steel be used with different nozzle angles and lengths (22/50/60 cm)?

Yes. The Foam lance with nozzle, plug DN11.8, stainless steel is available in three lengths-22 cm, 50 cm and 60 cm-and is supplied with an AK-NOZ50200 65Â° nozzle housed in a white nylon cover for the AKBO gun. You can choose the lance length to suit reach and handling needs; the nozzle angle provided is 65Â°. If you require a different spray angle you would need to replace the AK-NOZ50200 nozzle with a compatible nozzle of the desired angle, ensuring it fits the lance and DN11.8 inlet.

Does the Foam lance with nozzle, plug DN11.8, stainless steel require special maintenance for the white nylon cover?

No special or complicated maintenance is required for the white nylon cover of the Foam lance with nozzle, plug DN11.8, stainless steel. Basic care will keep the cover in good condition: - Rinse after use: wash the nylon cover with clean water after each use to remove chemical residues, foam concentrate and dirt. - Avoid strong solvents: do not use aggressive solvents or chlorinated cleaners that can degrade nylon; use mild detergent if deeper cleaning is needed. - Inspect regularly: check the cover for cuts, abrasions or melting caused by hot surfaces or chemicals; replace if damaged to avoid exposed metal. - Protect from heat and chemicals during storage: store the Foam lance with nozzle, plug DN11.8, stainless steel in a cool, dry place away from direct sunlight and harsh chemicals. - Gentle handling: avoid sharp impacts or dragging the tip on rough surfaces to prevent tearing the nylon. Following these simple steps ensures the white nylon cover remains protective and extends the service life of the Foam lance with nozzle, plug DN11.8, stainless steel.

Foam lance with nozzle, plug DN11.8, stainless steel

Additional information

Foam lance with nozzle (nozzle type AK-NOZ50200 – 65°) in a white nylon cover for AKBO gun. Connection: (inlet) DN11.8 plug. Available lengths: 22 cm, 50 cm, and 60 cm. Material: stainless steel, nylon (nozzle cover).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AK-LANCM22-NA-NW	Straight lance, L=22 cm, nozzle 50200 for foam, white nylon cover, plug DN11.8, SS	-	20	In stock	Enquiry
AK-LANCM50-NA-NW	Straight lance, L=50 cm, nozzle 50200 for foam, white nylon cover, plug DN11.8, SS	-	20	In stock	Enquiry
AK-LANCM60-NA-NW	Straight lance, L=60 cm, nozzle 50200 for foam, white nylon cover, plug DN11.8, SS	-	20	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Foam lance with nozzle (nozzle type AK-NOZ50200 – 65°) in a white nylon cover for AKBO gun. Connection: (inlet) DN11.8 plug. Available lengths: 22 cm, 50 cm, and 60 cm. Material: stainless steel, nylon (nozzle cover).