Does the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream double airflow at 2â8 bar while producing 90 dB noise?

Yes. The FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream draws ambient air at an exceptionally high rate, effectively doubling the airflow within its operating pressure range of 2â8 bar, and it produces a noise level of 90 dB. Operating temperature range: -10Â°C to +50Â°C.

Can the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream maintain doubled airflow across its -10Â°C to +50Â°C operating range?

Yes. The FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream is specified to draw air from the environment at an exceptionally high flow rate, doubling the airflow. Its operating temperature range is given as â10Â°C to +50Â°C, and no temperature-dependent derating is stated. Therefore, within the specified operating range and at the stated operating pressures (2â8 bar), the nozzle can maintain the doubled airflow. Note: actual performance can vary with installation, ambient conditions and system pressure; verify in application if precise flow figures are critical.

Does the FULL-JET injector nozzle, plastic, series 269 with 2 mm hole and wide air stream require special mounting to sustain doubled airflow?

No special mounting is required for the FULL-JET injector nozzle, plastic, series 269 with a 2 mm hole and wide air stream to sustain the doubled airflow. The nozzle is designed to draw air from the environment at an exceptionally high flow rate at operating pressures between 2 and 8 bar, so normal installation that secures the plastic body and supplies stable compressed air is sufficient. Ensure proper support to avoid mechanical stress on the plastic housing, maintain correct hose fittings and pressure supply, and provide adequate ventilation around the nozzle to allow free ambient air intake. Also consider noise mitigation (rated 90 dB) and operating temperature limits (â10Â°C to +50Â°C) when choosing mounting location and any nearby personnel protection.

Nozzle injector FULL-JET, plastic, series 269

Air guns, All products/

Additional information

Nozzle injector FULL-JET o diameter hole 2 mm with wide a stream air, sucks in air with ambient at exceptionally high flow, increasing flow air twice. level noise: 90 dB. Material: black plastic. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-269K45	Nozzle injector Full-Jet, orifice dia. 2 mm, M12x1.25 male, poliamid	-	10	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nozzle injector FULL-JET o diameter hole 2 mm with wide a stream air, sucks in air with ambient at exceptionally high flow, increasing flow air twice. level noise: 90 dB. Material: black plastic. pressure operating: 2 ÷ 8 bar. Operating temperature: from -10°C to +50°C.