Can DKJ hydraulic end, type ZJW110, carbon steel, be crimped with standard Z-type crimping sleeves and hoses?

Yes. The DKJ hydraulic end, type ZJW110, carbon steel (standard hydraulic end type Z with internal UNF thread and nut, sealing on a 74Â° cone) is designed to be crimped into hydraulic and industrial hoses using an appropriate crimping sleeve. Because it is a Z-type end with a regular âtailâ for the hose and is explicitly specified as âdesigned for crimping,â you should use a crimping sleeve and die set matched to the hose construction, hose size, and manufacturer recommendations. Also ensure the sleeve material and dimensions are compatible with carbon steel fitting tails and that crimping pressures follow the hose/sleeve/press manufacturerâs specs to achieve proper compression and seal.

Can DKJ hydraulic end, type ZJW110, carbon steel, be used with hoses that require a 74Â° cone seal and standard Z-type crimping sleeves?

Yes. DKJ hydraulic end, type ZJW110, carbon steel is designed to seal on a 74Â° cone (DKJ) and has a standard Z-type hydraulic tail for crimping. It is intended for crimping with a sleeve suitable for the hose type, so it can be used with hoses that require a 74Â° cone seal and standard Z-type crimping sleeves, provided the sleeve and crimp dimensions match the hose and fitting specifications. Always verify sleeve size and crimp specifications for compatibility before assembly.

Is DKJ hydraulic end, type ZJW110, carbon steel compatible with UNF-threaded hoses using a nut and 74Â° cone seal?

Yes. DKJ hydraulic end, type ZJW110, carbon steel is compatible with UNF-threaded hoses that use a nut and 74Â° cone seal. The product description specifies an internal UNF thread with nut and sealing on a 74Â° cone (DKJ), and it is designed for crimping onto hydraulic and industrial hoses using an appropriate crimping sleeve for the hose type. Ensure the hose, nut, and sleeve match the specified UNF size and crimp specifications for a proper, leak-free assembly.

DKJ hydraulic end, type ZJW110, carbon steel

All products, Fittings for high-pressure hoses/

Additional information

Material	CS – steel (cast iron)

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TI-ZJW110-06-03	End. JIC GW 3/8", hose 3/16", cone 74°	5	-	In stock	Enquiry
TI-ZJW110-07-03	End. JIC GW 7/16", hose 3/16", cone 74°	5	-	In stock	Enquiry
TI-ZJW110-07-04	End. JIC GW 7/16", hose 1/4", cone 74°	6	-	In stock	Enquiry
TI-ZJW110-07-05	End. JIC GW 7/16", hose 5/16", cone 74°	8	-	In stock	Enquiry
TI-ZJW110-07-06	End. JIC GW 7/16", hose 3/8", cone 74°	10	-	In stock	Enquiry
TI-ZJW110-08-03	End. JIC GW 1/2", hose 3/16", cone 74°	5	-	In stock	Enquiry
TI-ZJW110-08-04	End. JIC GW 1/2", hose 1/4", cone 74°	6	-	In stock	Enquiry
TI-ZJW110-08-05	End. JIC GW 1/2", hose 5/16", cone 74°	8	-	In stock	Enquiry
TI-ZJW110-09-03	End. JIC GW 9/16", hose 3/16", cone 74°	5	-	In stock	Enquiry
TI-ZJW110-09-04	End. JIC GW 9/16", hose 1/4", cone 74°	6	-	In stock	Enquiry
TI-ZJW110-09-05	End. JIC GW 9/16", hose 5/16", cone 74°	8	-	In stock	Enquiry
TI-ZJW110-09-06	End. JIC GW 9/16", hose 3/8", cone 74°	10	-	In stock	Enquiry
TI-ZJW110-10-04	End. JIC GW 5/8", hose 1/4", cone 74°	6	-	In stock	Enquiry
TI-ZJW110-10-05	End. JIC GW 5/8", hose 5/16", cone 74°	8	-	In stock	Enquiry
TI-ZJW110-10-06	End. JIC GW 5/8", hose 3/8", cone 74°	10	-	In stock	Enquiry
TI-ZJW110-12-05	End. JIC GW 3/4", hose 5/16", cone 74°	8	-	In stock	Enquiry
TI-ZJW110-12-06	End. JIC GW 3/4", hose 3/8", cone 74°	10	-	In stock	Enquiry
TI-ZJW110-12-08	End. JIC GW 3/4", hose 1/2", cone 74°	12	-	In stock	Enquiry
TI-ZJW110-14-06	End. JIC GW 7/8", hose 3/8", cone 74°	10	-	In stock	Enquiry
TI-ZJW110-14-08	End. JIC GW 7/8", hose 1/2", cone 74°	12	-	In stock	Enquiry
TI-ZJW110-14-10	End. JIC GW 7/8", hose 5/8", cone 74°	16	-	In stock	Enquiry
TI-ZJW110-14-12	End. JIC GW 7/8", hose 3/4", cone 74°	20	-	In stock	Enquiry
TI-ZJW110-17-08	End. JIC GW 1.1/16", hose 1/2", cone 74°	12	-	In stock	Enquiry
TI-ZJW110-17-10	End. JIC GW 1.1/16", hose 5/8", cone 74°	16	-	In stock	Enquiry
TI-ZJW110-17-12	End. JIC GW 1.1/16", hose 3/4", cone 74°	20	-	In stock	Enquiry
TI-ZJW110-17-16	End. JIC GW 1.1/16", hose 1", cone 74°	25	-	In stock	Enquiry
TI-ZJW110-19-12	End. JIC GW 1.3/16", hose 3/4", cone 74°	20	-	In stock	Enquiry
TI-ZJW110-19-16	End. JIC GW 1.3/16", hose 1", cone 74°	25	-	In stock	Enquiry
TI-ZJW110-21-10	End. JIC GW 1.5/16", hose 5/8", cone 74°	16	-	In stock	Enquiry
TI-ZJW110-21-12	End. JIC GW 1.5/16", hose 3/4", cone 74°	20	-	In stock	Enquiry
TI-ZJW110-21-16	End. JIC GW 1.5/16", hose 1", cone 74°	25	-	In stock	Enquiry
TI-ZJW110-21-20	End. JIC GW 1.5/16", hose 1.1/4", cone 74°	32	-	In stock	Enquiry
TI-ZJW110-26-16	End. JIC GW 1.5/8", hose 1", cone 74°	25	-	In stock	Enquiry
TI-ZJW110-26-20	End. JIC GW 1.5/8", hose 1.1/4", cone 74°	32	-	In stock	Enquiry
TI-ZJW110-30-20	End. JIC GW 1.7/8", hose 1.1/4", cone 74°	32	-	In stock	Enquiry
TI-ZJW110-30-24	End. JIC GW 1.7/8", hose 1.1/2", cone 74°	38	-	In stock	Enquiry
TI-ZJW110-40-32	End. JIC GW 2.1/2", hose 2", cone 74°	50	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Standard hydraulic end (type Z – with a regular hydraulic “tail” for the hose), with internal UNF thread and nut, sealing on a 74° cone (DKJ). Designed for crimping in hydraulic and industrial hoses using a crimping sleeve suitable for the type of hose. Material: carbon steel, galvanized.