Is the Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD suitable for gas installations due to its extra Oâring and safety ring?

Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD: Based on the description, yes . it is suitable for gas installations. The presence of an additional Oâring beyond the standard 3/16" seal and the safety ring to prevent accidental disconnection are explicitly mentioned as features making it suitable for gas service. Material (AISI 316 stainless), Viton sealing, temperature range (-20Â°C to +200Â°C) and specified application list (including gases) further support suitability. Note operational limits: use only in 3/16" and 1/4" sizes (socket side only), reduce maximum working pressure by 50% for pulsating pressure, and observe the specified max working pressure (up to 300 bar depending on diameter) and safety factor 4:1.

Can the Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD be used for pulsating-pressure gas systems and what pressure limits apply?

Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD can be used for gas installations (additional Oâring, Viton seal) and includes safety ring to prevent accidental disconnection. It is suitable for pulsatingâpressure gas systems only with reduced allowable pressure: for pulsating pressure the maximum working pressure must be reduced by 50%. Nominal working pressure (depending on diameter) is up to 300 bar for steady conditions; therefore for pulsating gas use the limit becomes up to 150 bar (subject to actual coupling size and diameter rating). Safety factor 4:1 and operating temperature range â20Â°C to +200Â°C apply.

Does the Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD require special installation for gas service?

Hydraulic quick coupling with valve, socket with GW BSP, NPT in stainless steel, TEMA STANDARD: Based on the provided TEMA STANDARD description, no special installation beyond standard good-practice is required for gas service, but specific precautions apply. The socket includes an additional Oâring (besides the 3/16" size Oâring) making it suitable for gas installations, and a safety ring prevents accidental disconnection. Use only approved sizes: as a oneâsided shutâoff quick coupling it is suitable for gas service only in sizes 3/16" and 1/4" (from the socket side). Ensure Viton seals, AISI 316 construction, and working pressure rating (up to 300 bar depending on diameter) meet your gas application requirements. For pulsating gas pressure reduce the maximum working pressure by 50%. Confirm compatibility of Viton with the specific gas and operating temperature range (â20Â°C to +200Â°C). Follow standard safety and installation practices for gas systems (leak testing, proper thread sealing for BSP/NPT, torqueing, and prevention of accidental disconnection).

A hydraulic quick coupling with a valve, socket with female thread BSP, NPT of stainless steel, TEMA STANDARD

All products, Hydraulic quick couplings/

Additional information

Material	SS – stainless steel
Standard length [m]	50

The TEMA STANDARD (NORDIC RANGE) quick-coupling socket with a shut-off valve and a BSP, NPT female thread. The socket has an additional O-ring (except for the 3/16″ size), which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. As a single-shut-off quick coupling it can only be used for sizes 3/16″ and 1/4″ (only from the socket side). Intended for heavy-duty operating conditions. For pulsating pressure, the maximum working pressure should be reduced by 50%. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: AISI 316 stainless steel. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. Sealing: viton. Operating temperature: from -20°C to +200°C. The flow is given for a pressure drop of 3 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TA-H-10010RV	Socket SS with 1" BSP female, seal Viton, with a valve	-	250	In stock	Enquiry
TA-H-10010RVNPT	Socket SS with 1" NPT female, seal Viton, with a valve	-	250	In stock	Enquiry
TA-H-15010RV	Socket SS with 1.1/2" BSP female, seal Viton, with a valve	-	150	In stock	Enquiry
TA-H-20010RV	Socket SS with 2" BSP female, seal Viton, with a valve	-	120	In stock	Enquiry
TA-H-2310RFV	Socket SS with 1/8" BSP female, sealViton, with a valve	-	200	In stock	Enquiry
TA-H-2510RV	Socket SS with 1/4" BSP female, seal Viton, with a valve	-	250	In stock	Enquiry
TA-H-3810RV	Socket SS with 3/8" BSP female, seal Viton, with a valve	-	300	In stock	Enquiry
TA-H-5010RV	Socket SS with 1/2" BSP female, seal Viton, with a valve	-	300	In stock	Enquiry
TA-H-7510RV	Socket SS with 3/4" BSP female, seal Viton, with a valve	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

The TEMA STANDARD (NORDIC RANGE) quick-coupling socket with a shut-off valve and a BSP, NPT female thread. The socket has an additional O-ring (except for the 3/16″ size), which makes it suitable for gas installations. It also has a ring to prevent accidental disconnection. As a single-shut-off quick coupling it can only be used for sizes 3/16″ and 1/4″ (only from the socket side). Intended for heavy-duty operating conditions. For pulsating pressure, the maximum working pressure should be reduced by 50%. Application: power hydraulics (hydraulic oil), industrial (water, steam, fuels and oils, gases and chemicals). Material: AISI 316 stainless steel. Working pressure: up to 300 bar (depending on the diameter). Safety factor 4:1. Sealing: viton. Operating temperature: from -20°C to +200°C. The flow is given for a pressure drop of 3 bar.