Is the Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling compatible with both DN2 and DN4 measuring hoses?

Yes. The Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling is supplied with an end specifically designed for measuring hoses DN2 or DN4 and is delivered complete with a clamping sleeve, so it is compatible with both DN2 and DN4 measuring hoses. Compatibility depends only on selecting the correct hose size (DN2 or DN4) when ordering; series options L (light) and S (heavy), material (steel with Zn-Ni coating), sealing (NBR O-ring), and pressure/temperature ratings remain the same per the chosen size.

Can the Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling be used at temperatures down to -30Â°C without sealing failure?

Yes. The Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling Format uses an NBR O-ring and is specified for an operating temperature range from -30Â°C to +120Â°C. Therefore, when used within that specified range and under the stated working pressures (250â630 bar depending on size), it is rated for use down to -30Â°C without sealing failure, provided installation, hose selection (DN2 or DN4) and assembly (clamping sleeve) follow manufacturer instructions and no additional extreme conditions (chemical exposure, rapid cycling, mechanical damage) are present.

Can the Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling be used with standard clamping sleeves?

Yes. the Metric ISO 12151-2 24Â° cone with O-ring, 90Â° angle and measuring hose coupling Format can be used with standard clamping sleeves. The product description explicitly states the end is designed for hoses DN2 or DN4 and is supplied complete with a clamping sleeve, which indicates compatibility with the standard clamping-sleeve system for those hose sizes. Notes to ensure proper use: - Match the clamping sleeve size to the hose nominal diameter (DN2 or DN4). - Observe series selection (L light or S heavy) to match application strength and pressure requirements. - Verify material and coating (steel with zinc-nickel) and the NBR O-ring are suitable for your fluid and temperature range (-30Â°C to +120Â°C). - Confirm the working pressure for the specific size (250â630 bar) meets your systemâs maximum pressure. If you need confirmation for a specific hose brand or nonstandard sleeve type, provide the hose details for a precise compatibility check.

Metric ISO 12151-2 24° cone with O-ring, 90° angle and measuring hose coupling

Additional information

Material	CS – steel (cast iron)

Metric connection ISO 12151-2 cone 24° with O-ring and nut, angled 90° and end for measuring hose. The connection is available as: L (light series) and S (heavy series), while the end is designed for hoses DN2 or DN4 and supplied complete with a clamping sleeve. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
PS-801-42-006-00	End fitting 90° G1/2 M12x1.5 lightweight, 24° cone, O-ring, hose 2x5 mm, with sleeve	2	250	In stock	Enquiry
PS-801-42-008-00	End. 90° G1/2 M14x1.5 light, cone 24°, o-ring, hose 2x5 mm, with sleeve	2	250	In stock	Enquiry
PS-801-42-010-00	End. 90° G1/2 M16x1.5 light, cone 24°, o-ring, hose 2x5 mm, with sleeve	2	250	In stock	Enquiry
PS-801-43-006-00	End. 90° G1/2 M14x1.5 heavy, cone 24°, o-ring, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-43-008-00	End. 90° G1/2 M16x1.5 heavy, cone 24°, o-ring, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-801-43-010-00	End. 90° G1/2 M18x1.5 heavy, cone 24°, o-ring, hose 2x5 mm, with sleeve	2	630	In stock	Enquiry
PS-804-42-006-00	End. 90° G1/2 M12x1.5 light, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	250	In stock	Enquiry
PS-804-42-008-00	End. 90° G1/2 M14x1.5 light, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	250	In stock	Enquiry
PS-804-42-010-00	End. 90° G1/2 M16x1.5 light, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	250	In stock	Enquiry
PS-804-43-006-00	End. 90° G1/2 M14x1.5 heavy, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	500	In stock	Enquiry
PS-804-43-008-00	End. 90° G1/2 M16x1.5 heavy, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	500	In stock	Enquiry
PS-804-43-010-00	End. 90° G1/2 M18x1.5 heavy, cone 24°, o-ring, hose 4x8 mm, with sleeve	4	500	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Metric connection ISO 12151-2 cone 24° with O-ring and nut, angled 90° and end for measuring hose. The connection is available as: L (light series) and S (heavy series), while the end is designed for hoses DN2 or DN4 and supplied complete with a clamping sleeve. Material: steel with zinc-nickel coating. Working pressure: from 250 bar to 630 bar – depending on size. Sealing: NBR O-ring. Operating temperature: from -30°C to +120°C.