Is the ISO bracket for pneumatic cylinder flange B, model GS, compatible with both metric and imperial threaded mounting holes?

ISO bracket for pneumatic cylinder flange B, model GS Format is a cast-aluminum swivel flange kit with 4 screws and washers (galvanized carbon steel). The description alone does not specify whether the threaded mounting holes are metric or imperial. Compatibility depends on the thread type and pitch of the screws and the threaded holes in the cylinder: - If the included screws match the cylinderâs threaded holes (same thread standard and pitch), the bracket will be compatible. - Without explicit notation (e.g., M5, M6 for metric or 1/4"-20, 5/16"-18 for imperial), you cannot assume both standards are supported. - To confirm compatibility, check the cylinderâs flange thread specification or contact the supplier for the bracketâs screw size and thread form. If necessary, obtain a version of the bracket or a screw set that matches your cylinderâs thread standard.

Does the ISO bracket for pneumatic cylinder flange B, model GS include corrosion-resistant coatings on the screws and washers?

No - the ISO bracket for pneumatic cylinder flange B, model GS does not include corrosion-resistant coatings on the screws and washers. The description states the screws and washers are made of galvanized carbon steel, which provides basic corrosion protection through galvanization but does not indicate any additional specialized corrosion-resistant coatings. The flange itself is cast aluminum.

Does the ISO bracket for pneumatic cylinder flange B, model GS include installation instructions or torque specs for the 4 screws?

No. the ISO bracket for pneumatic cylinder flange B, model GS Format does not include installation instructions or torque specifications. The product description only lists: ISO bracket for mounting with a swivel flange. Included: 4 screws with washers. Material: cast aluminum (flange), galvanized carbon steel (screws and washers). No mounting procedures, tightening torques, or assembly guidelines are provided. For safe and correct installation, refer to the cylinder manufacturerâs ISO standard recommendations or contact the supplier/manufacturer for specific torque values and installation instructions. If you cannot obtain guidance, use common practice for the screw material and size (clean threads, appropriate washers, gradual cross-pattern tightening, and a conservative torque based on screw grade and diameter) and consider applying a threadlocker or consulting an engineer.

A bracket ISO for flange actuator pneumatic B, model GS

All products, Pneumatic actuators/

Additional information

Material	AL – aluminum

A bracket ISO for mounting with a flange swivel. In the set: 4 screws with washers. Material: aluminum cast (flange), steel carbon galvanized (screws and washer).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-W0950322108	A bracket MOD.GS-032	-	-	In stock	Enquiry
MW-W0950402108	A bracket MOD.GS-040	-	-	In stock	Enquiry
MW-W0950502108	A bracket MOD.GS-050	-	-	In stock	Enquiry
MW-W0950632108	A bracket MOD. GS-063	-	-	In stock	Enquiry
MW-W0950802108	A bracket ISO MOD.GS-080	-	-	In stock	Enquiry
MW-W0951002108	A bracket MOD.GS-100	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A bracket ISO for mounting with a flange swivel. In the set: 4 screws with washers. Material: aluminum cast (flange), steel carbon galvanized (screws and washer).