Is the Level gauge with and without thermometer, aluminum, APW compatible with standard BANJO mounting screws and fittings?

Level gauge with and without thermometer, aluminum, APW Format is compatible with standard BANJO mounting screws and fittings. The product description states that oil enters the level gauge through openings in BANJO type mounting screws, which indicates it is designed to work with BANJO-style fittings. Materials and sealing (polyamide body, aluminum housing, NBR seals) and the stated operating temperature range (-20Â°C to +80Â°C) further support typical compatibility with standard BANJO hardware.

Can the Level gauge with and without thermometer, aluminum, APW be installed on non-BANJO mounting systems or adapted for them?

Level gauge with and without thermometer, aluminum, APW Format is designed specifically for tanks using BANJO-type mounting screws: oil enters the gauge through openings in those BANJO fittings. Because the body, sealing (NBR) and oil entry depend on BANJO screw geometry, direct installation on nonâBANJO mounting systems is not recommended without modification. Adaptation may be possible only by using a proper adapter that replicates BANJO mounting and sealing dimensions or by replacing the tank port with a compatible BANJO fitting; this should be engineered to maintain pressure/seal integrity and temperature range (-20Â°C to +80Â°C). Consult the manufacturer or a qualified engineer before attempting any modification.

Does the Level gauge with and without thermometer, aluminum, APW require special sealing materials for extreme temperatures?

Level gauge with and without thermometer, aluminum, APW Format. No special sealing materials are required beyond the supplied NBR seals for the stated operating range. The product description specifies NBR sealing and an operating temperature range of -20Â°C to +80Â°C; NBR (nitrile rubber) is suitable and intended for use within these temperatures. If the application exposes the gauge to temperatures outside -20Â°C to +80Â°C, or to aggressive fluids incompatible with NBR (certain fuels, ketones, strong acids/alkalis, or high-concentration aromatic hydrocarbons), then alternative seal materials (e.g., FKM/Viton, EPDM, or PTFE) should be considered and compatibility verified. For standard hydraulic oil use within the given temperature limits, the supplied NBR seals are appropriate and no special sealing materials are needed.

Level gauge with and without thermometer, aluminum, APW

All products, Other high-pressure accessories/

Additional information

Material	AL – aluminum

Level gauge designed for monitoring hydraulic oil levels, mounted on the side wall of the tank. Available in two versions: without a thermometer and with a thermometer. Oil enters the level gauge through openings in BANJO type mounting screws. Material: polyamide (body), aluminum (housing), polyamide (inspection port). Sealing: NBR. Operating temperature: from -20°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AH-APW-01	Level gauge, D=76 mm	-	-	In stock	Enquiry
AH-APW-02	Level gauge, D=127 mm	-	-	In stock	Enquiry
AH-APW-03	Level gauge, D=254 mm	-	-	In stock	Enquiry
AH-APW-T1	Level gauge with thermometer, D=76 mm	-	-	In stock	Enquiry
AH-APW-T2	Level gauge with thermometer, D=127 mm	-	-	In stock	Enquiry
AH-APW-T3	Level gauge with thermometer, D=254 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Level gauge designed for monitoring hydraulic oil levels, mounted on the side wall of the tank. Available in two versions: without a thermometer and with a thermometer. Oil enters the level gauge through openings in BANJO type mounting screws. Material: polyamide (body), aluminum (housing), polyamide (inspection port). Sealing: NBR. Operating temperature: from -20°C to +80°C.