Is the Long nipple GZ NPT stainless steel, 113H compatible with AISI 316 piping systems and suitable for use in chemical, pharmaceutical, and nuclear applications?

Yes. The Long nipple GZ NPT stainless steel, 113H is made of AISI 316 stainless steel and is explicitly described for pipe connections intended for the chemical, petrochemical, pharmaceutical, energy, nuclear power, and process engineering industries. Therefore it is compatible with AISI 316 piping systems and suitable for use in chemical, pharmaceutical, and nuclear applications, provided that the specific operating conditions (pressure, temperature, media, radiation, and regulatory requirements) match the material and NPT connection performance. For critical or regulated nuclear and pharmaceutical installations, perform full verification: material traceability/certificates, surface finish and cleanliness, compatibility with process chemicals, applicable pressure/temperature ratings, welding/fitting procedures, and compliance with relevant standards and customer/specification requirements.

Can Long nipple GZ NPT stainless steel, 113H withstand corrosive environments in petrochemical and energy plants?

Yes. Long nipple GZ NPT stainless steel, 113H (AISI 316) is suitable for many corrosive environments found in petrochemical and energy plants. AISI 316 offers improved corrosion resistance over 304 due to molybdenum content, providing good resistance to chlorides, seawater, and many chemical media common in petrochemical, pharmaceutical, energy and process industries. The 113H long nipple design with external NPT thread is intended for such sectors, so it is appropriate for typical corrosive service. Limitations: AISI 316 is not immune to all conditions-high chloride concentrations, crevice or pitting corrosion, sour gas (H2S), highly oxidizing acids, or very high temperatures may require duplex, superaustenitic, or nickel-alloy materials. Specify process chemistry, temperature, pressure and exposure (e.g., H2S, chlorides, oxidizers) to confirm suitability or consider higher-alloy alternatives and appropriate coatings.

Does Long nipple GZ NPT stainless steel, 113H meet ASME/B31.3 or other pressure piping codes for process plants?

Long nipple GZ NPT stainless steel, 113H Format: zwykÅy tekst Possibly. but not automatically. Compliance with ASME B31.3 or other pressure piping codes depends on manufacture, testing, documentation and how the part is used, not only on description and material. Key points to verify: - Material specification: AISI 316 is an acceptable stainless steel family for many process applications, but code conformity requires traceable material certification (e.g., mill test report) showing chemical and mechanical properties meet the specific code or project material spec. - Design and pressure rating: ASME B31.3 requires fittings and components to be suitable for the design pressure and temperature of the piping system. A plain description (âlong nipple with external NPT thread, type 113Hâ) does not state pressure ratings, wall thickness, or allowable stresses. You must confirm the nippleâs dimensions and rating meet the piping design conditions. - Thread type: NPT threads are American tapered pipe threads; codes permit threaded connections in certain cases but limit their use (e.g., for lowâtemperature, lowâpressure, and specific sizes) and require proper engagement, sealing, and torqueing practices. - Manufacturing and testing: Code compliance generally requires controlled manufacturing processes, heat treatment if applicable, nonâdestructive examination where required, and pressure testing or inspection records. Evidence of quality systems (e.g., ISO 9001) and supplier traceability is often required by owners. - Certification and documentation: To claim ASME B31.3 conformance you need supplier declarations, material certificates (3.1/3.2), inspection/test reports, and any applicable thirdâparty approvals specified by the project or owner. - Nuclear or other special industries: Nuclear and some energy sectors impose stricter standards (e.g., ASME Section III, NQAâ1) beyond B31.3; AISI 316 alone is not sufficient to meet those requirements without the relevant qualification and documentation. Recommendation: Request from the supplier: mill test reports for AISI 316, dimensional drawings, pressure/temperature ratings, manufacturing and inspection records, and a statement of applicability to ASME B31.3 (or other applicable code). Have your engineer review suitability for the specific service conditions.

Nipple long NPT male steel stainless, 113H

All products, Precision threaded fasteners/

Additional information

Material	SS – stainless steel
Standard length [m]	2

Nipple long with a thread external NPT, type 113H, for pipe connections intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HM-P113H-02-SS-1,5	Nipple 1/8" NPT male, L=1.5", SS	-	690	In stock	Enquiry
HM-P113H-02-SS-2	Nipple 1/8" NPT male, L=2", SS	-	690	In stock	Enquiry
HM-P113H-02-SS-3	Nipple 1/8" NPT male, L=3", SS	-	690	In stock	Enquiry
HM-P113H-04-SS-1,5	Nipple 1/4" NPT male, L=1.5", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-2	Nipple 1/4" NPT male, L=2", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-2,5	Nipple 1/4" NPT male, L=2.5", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-3	Nipple 1/4" NPT male, L=3", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-4	Nipple 1/4" NPT male, L=4", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-5	Nipple 1/4" NPT male, L=5", SS	-	552	In stock	Enquiry
HM-P113H-04-SS-6	Nipple 1/4" NPT male, L=6", SS	-	552	In stock	Enquiry
HM-P113H-06-SS-2	Nipple 3/8" NPT male, L=2", SS	-	538	In stock	Enquiry
HM-P113H-06-SS-3	Nipple 3/8" NPT male, L=3", SS	-	538	In stock	Enquiry
HM-P113H-06-SS-4	Nipple 3/8" NPT male, L=4", SS	-	538	In stock	Enquiry
HM-P113H-08-SS-2	Nipple 1/2" NPT male, L=2", SS	-	531	In stock	Enquiry
HM-P113H-08-SS-2,5	Nipple 1/2" NPT male, L=2.5", SS	-	531	In stock	Enquiry
HM-P113H-08-SS-3	Nipple 1/2" NPT male, L=3", SS	-	531	In stock	Enquiry
HM-P113H-08-SS-4	Nipple 1/2" NPT male, L=4", SS	-	531	In stock	Enquiry
HM-P113H-08-SS-5	Nipple 1/2" NPT male, L=5", SS	-	531	In stock	Enquiry
HM-P113H-08-SS-6	Nipple 1/2" NPT male, L=6", SS	-	531	In stock	Enquiry
HM-P113H-12-SS-2	Nipple 3/4" NPT male, L=2", SS	-	503	In stock	Enquiry
HM-P113H-12-SS-3	Nipple 3/4" NPT male, L=3", SS	-	503	In stock	Enquiry
HM-P113H-12-SS-4	Nipple 3/4" NPT male, L=4", SS	-	503	In stock	Enquiry
HM-P113H-16-SS-3	Nipple 1" NPT male, L=3", SS	-	366	In stock	Enquiry
HM-P113H-16-SS-4	Nipple 1" NPT male, L=4", SS	-	366	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nipple long with a thread external NPT, type 113H, for pipe connections intended mainly for industry chemical, petrochemical, pharmaceutical, power generation, nuclear power plants and process engineering. Material: steel AISI 316.