Does the Mini double-acting actuator, ISO 6432 TP series, support strokes up to 500 mm on all piston diameters (Ã16, 20, 25)?

Mini double-acting actuator, ISO 6432 TP series supports piston diameters Ã16, Ã20 and Ã25 with standard working strokes from 1 to 80 mm. It is stated that there is a possibility of ordering strokes up to 500 mm, so extended strokes (up to 500 mm) are available as a special order. The description does not explicitly limit the 500 mm option to specific piston diameters, therefore it should be assumed that the up-to-500 mm ordering option applies to the listed piston diameters (Ã16, 20, 25). For confirmation of mechanical limits, delivery time, and any diameter-specific restrictions or additional costs, please contact the manufacturer or supplier before ordering.

Can the Mini double-acting actuator, ISO 6432 TP series, operate reliably at temperatures from -10Â°C to +60Â°C across all configurations?

Yes. The Mini double-acting actuator, ISO 6432 TP series is specified with an operating temperature range of -10Â°C to +60Â°C. Given the materials and construction stated - anodized aluminum cylinder, high-strength plastic covers, polyurethane seals - the actuator is designed to operate reliably across that entire temperature range in all listed configurations (with or without magnet, piston diameters Ã16/20/25 mm, strokes 1â80 mm, pressures 0.6â10 bar). For extreme application demands (longer strokes up to 500 mm, prolonged exposure at temperature limits, or aggressive media), validate suitability with the manufacturer or perform application-specific testing.

Are magnetic and non-magnetic versions of the Mini double-acting actuator, ISO 6432 TP series, interchangeable?

Mini double-acting actuator, ISO 6432 TP series: Are magnetic and non-magnetic versions interchangeable? Yes. magnetic and non-magnetic versions of the Mini double-acting actuator, ISO 6432 TP series are mechanically interchangeable. Both versions share the same ISO 6432 dimensions (piston diameters Ã16, Ã20, Ã25), anodized aluminum cylinder construction, high-strength plastic covers, identical stroke ranges (1â80 mm standard, up to 500 mm on request), working pressure (0.6â10 bar), sealing (polyurethane) and operating temperature range (â10Â°C to +60Â°C). This common design means they can be swapped in the same mounting arrangement and pneumatic circuit without changes to cylinder bore, stroke, ports or mounting interfaces. However, they are not functionally identical: the magnetic version contains an internal magnet to allow external magnetic sensors (proximity switches) to detect piston position; the non-magnetic version lacks this feature. If your application relies on magnetic position sensing, replacing a magnetic unit with a non-magnetic one will remove that capability. Conversely, installing a magnetic version where no sensing is required does not affect basic pneumatic performance but may introduce compatibility considerations with existing sensor hardware (e.g., sensor placement or sensitivity). In summary: interchangeable in form, fit and basic function; not interchangeable in sensing capability.

Mini double-acting actuator, ISO 6432 TP series

All products, Pneumatic actuators/

Additional information

Maximum operating temperature [°C]	60
Minimum operating temperature [°C]	-10

Mini actuators of the TP series, manufactured according to ISO 6432 standards, have covers made of high-strength plastic, while the cylinders are made of anodized aluminum. Available versions: with magnet or without magnet. Piston diameter: Ø 16, 20, and 25 mm. Working stroke: from 1 to 80 mm (with the possibility of ordering up to 500 mm). Working pressure: from 0.6 to 10 bar. Sealing: polyurethane. Operating temperature: from -10°C to +60°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
MW-1103200050CP	ISO 6432 actuator 20-0050	-	10	In stock	Enquiry
MW-1103250040CP	ISO 6432 actuator 25-0040	-	10	In stock	Enquiry
MW-1123160030XP	ISO 6432 actuator 16-0030	-	10	In stock	Enquiry
MW-1123250050CP	ISO 6432 actuator 25-0050	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Mini actuators of the TP series, manufactured according to ISO 6432 standards, have covers made of high-strength plastic, while the cylinders are made of anodized aluminum. Available versions: with magnet or without magnet. Piston diameter: Ø 16, 20, and 25 mm. Working stroke: from 1 to 80 mm (with the possibility of ordering up to 500 mm). Working pressure: from 0.6 to 10 bar. Sealing: polyurethane. Operating temperature: from -10°C to +60°C.