Is the Mounting sleeve for air conditioning, aluminum, type 2051B compatible with thin-walled refrigerant hose ends and clamp mounting sleeve type 2015B?

Yes. The Mounting sleeve for air conditioning, aluminum, type 2051B is compatible with thin-walled refrigerant hose ends and the clamp mounting sleeve type 2015B. Both items are made of aluminum and are designed for use with thin-walled refrigerant hose ends, so they share material compatibility and intended application. Ensure matching hose outer diameter and clamp dimensions when installing to guarantee a secure fit.

Can Mounting sleeve for air conditioning, aluminum, type 2051B be used interchangeably with Clamp mounting sleeve for thin-walled refrigerant hose ends, type 2015B?

No - Mounting sleeve for air conditioning, aluminum, type 2051B cannot be assumed interchangeable with Clamp mounting sleeve for thin-walled refrigerant hose ends, type 2015B based on the given description. Although both are aluminum sleeves, type 2015B is specified for thin-walled refrigerant hose ends and likely has dimensions, wall thickness, clamping method and sealing features tailored to that application. Type 2051B, designed for air conditioning mounting, may differ in internal diameter, length, clamp compatibility and pressure/seal requirements. Interchangeability requires verifying exact dimensions, intended hose/wire sizes, sealing/clamping design and operating pressure ratings; without those matching specifications, substitution is not recommended.

Does Mounting sleeve for air conditioning, aluminum, type 2051B fit the same hose dimensions as clamp mounting sleeve type 2015B?

Yes. Mounting sleeve for air conditioning, aluminum, type 2051B fits the same hose dimensions as clamp mounting sleeve type 2015B, provided the relevant dimensional specs (inner diameter, wall thickness range and end profile) match. Both products are aluminum sleeves intended for thin-walled refrigerant hose ends; type 2015B is described for thin-walled hoses, so if type 2051B is manufactured to the same nominal internal diameter and accepts the same hose wall thickness and end preparation, they are interchangeable for hose fit. To be certain, compare these specific measurements on the product datasheets: inner bore diameter, acceptable hose outer diameter range, clamping/profile geometry, and any stepped or chamfered ends. If those dimensions are identical, the sleeves will fit the same hose. If datasheets differ, choose the sleeve whose inner diameter and wall-thickness tolerance match your hose.

Sleeve mounting for air conditioning, aluminum, type 2051B

Additional information

Material	AL – aluminum

Sleeve mounting crimped for ends for thin-walled hoses for freon, type 2015B. Material: aluminum.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
BU-2051B-06	Sleeve for thin-walled hoses for freonu 5/16"	-	-	In stock	Enquiry
BU-2051B-08	Sleeve for thin-walled hoses for freonu 13/32"	-	-	In stock	Enquiry
BU-2051B-10	Sleeve for thin-walled hoses for freonu 1/2"	-	-	In stock	Enquiry
BU-2051B-12	Sleeve for thin-walled hoses for freonu 5/8"	-	-	In stock	Enquiry