Is the MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel suitable for 25 bar working pressure with PTFE seal and AISI 316 ends?

Yes. The MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel is suitable for 25 bar working pressure when built as described: AISI 316 steel ends and a PTFE seal. The product specification explicitly lists Working pressure: 25 bar, End material: AISI 316 steel, and Seal: PTFE, matching your requirements. Ensure that hose, fittings and operating conditions (temperature, media compatibility, dynamic loads) are also compatible with PTFE and AISI 316 at 25 bar for safe, long-term use.

Can the MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel be used with PTFE seals at 25 bar?

Yes. The MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel can be used with PTFE seals at 25 bar. The product description specifies a complete MSL coupling for hose with aluminum shell clamp EN 14420-3 (DIN 2817), finished with internal thread and hexagonal nut; end material AISI 316 stainless steel; seal PTFE; working pressure 25 bar-so the coupling is rated for that pressure with PTFE seals. Ensure compatibility with your media, temperature range, and installation practices for safe operation.

Does the MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel support PTFE seals at 25 bar?

Yes. The MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hex nut, stainless steel supports PTFE seals at 25 bar. The product description specifies End material: AISI 316 steel, Seal: PTFE, Working pressure: 25 bar, which confirms compatibility and rated operation at that pressure.

MSL threaded coupling with EN 14420-3 (DIN 2817) clamp, hexagonal nut, stainless steel

All products, Threaded couplings and adapters/

Additional information

Material	SS – stainless steel

Complete MSL hose coupling with an aluminum shell clamp EN 14420-3 (DIN 2817), terminated with a female thread with a hexagonal nut. Fitting material: AISI 316 steel. Gasket: PTFE. Working pressure: 25 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
GD-MSLB-032-025-SS-CL-06	Coupling MSL 1.1/4" BSP female, for 25 mm hose, AISI 316, with aluminum clamp 25x6 mm	25	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Complete MSL hose coupling with an aluminum shell clamp EN 14420-3 (DIN 2817), terminated with a female thread with a hexagonal nut. Fitting material: AISI 316 steel. Gasket: PTFE. Working pressure: 25 bar.