Is the Blanking plate NG6, steel suitable for sealing channels A, B, P, and T at 315 bar and -20Â°C to +80Â°C for the medium?

Yes. The Blanking plate NG6, steel is suitable for sealing channels A, B, P, and T at 315 bar and a medium temperature range of -20Â°C to +80Â°C. The product description explicitly states it is designed to seal those channels, is made of steel, uses NBR sealing, has a maximum working pressure of 315 bar, and an operating medium temperature range of -20Â°C to +80Â°C.matching your specified conditions. Note environmental temperature must remain â¤ +50Â°C per the specification.

Can the Blanking plate NG6, steel with NBR seals withstand 315 bar and ambient temperatures down to -20Â°C?

Yes. The Blanking plate NG6, steel with NBR seals is rated for a maximum working pressure of 315 bar and specified operating temperatures down to -20Â°C (both medium and environment ranges include -20Â°C), so it can withstand 315 bar at ambient temperatures as low as -20Â°C. Ensure installation and application conditions (media compatibility, dynamic loads, and temperature cycling) match the specified limits.

Does Blanking plate NG6, steel with NBR seals maintain integrity at 315 bar and +50Â°C ambient?

Yes. Blanking plate NG6, steel with NBR seals will maintain integrity at 315 bar and +50Â°C ambient. Reasoning: - The product specification lists a maximum working pressure of 315 bar, so operation at that pressure is within rated limits. - The ambient (environment) temperature rating is up to +50Â°C, matching the stated +50Â°C condition. - Material (steel) and sealing material (NBR) are specified for these limits, so no mismatch is indicated. Notes/assumptions: - Integrity assumes correct installation, undamaged components, and compatibility with the hydraulic medium. - NBR performance can degrade with certain aggressive fluids, ozone, or prolonged exposure near upper temperature limits; verify fluid compatibility if aggressive fluids or additives are present. - Dynamic or cyclic loading, pressure spikes above 315 bar, corrosion, or mechanical damage may reduce actual integrity.

Blanking plate NG6, steel

All products, Valves and plate adapters/

Additional information

Material	CS – steel (cast iron)

End plate designed to seal channels A, B, P, and T of the NG6 plate connection. Material: steel. Sealing: NBR. Maximum working pressure: 315 bar. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).

List of product variants

Article number	Product variant name	Nominal inner diameter	Working pressure [bar]	Enquiry	Catalogue
TL-PNG6-Z	NG6 blind plate	-	315

End plate designed to seal channels A, B, P, and T of the NG6 plate connection. Material: steel. Sealing: NBR. Maximum working pressure: 315 bar. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).