Is the Normally open solenoid valve, type VCF suitable for continuous operation at 250 bar and temperatures between -30Â°C and +100Â°C?

Yes. The Normally open solenoid valve, type VCF is specified for a working pressure of 250 bar and an operating temperature range of -30Â°C to +100Â°C, so on paper it is suitable for continuous operation within those limits. However, for reliable 24/7 continuous service you should confirm a few practical details with the manufacturer or vendor: - Continuous-duty rating of the solenoid coil (verify it is designed for continuous energization, not just intermittent duty). - Thermal performance of the coil and whether IP65 enclosure and aluminum/galvanized materials provide adequate heat dissipation at +100Â°C ambient or in enclosed installations. - Long-term chemical and temperature compatibility of the NBR seals at the extremes (NBR can harden above +80â¦+100Â°C and may be marginal near the upper limit depending on fluid and additives). - Effects of high-pressure cycling on seal and valve life at 250 bar (fatigue, leakage). - Required couplings and proper installation torque to avoid mechanical stress on the body. If the coil is rated for continuous duty and NBR compatibility with your hydraulic fluid at the expected temperature, the Normally open solenoid valve, type VCF can be used continuously at 250 bar and -30Â°C to +100Â°C.

Can the Normally open solenoid valve, type VCF be mounted using the pictured mounting holes without additional brackets?

Yes. The Normally open solenoid valve, type VCF can be mounted using the pictured mounting holes without additional brackets. The valve is provided with built-in mounting holes (visible in the photo) and its aluminum body and galvanized steel components are designed for high-pressure hydraulic use up to 250 bar. Ensure proper sealing (NBR), maintain IP65 protection, and respect the operating temperature range (-30Â°C to +100Â°C). Verify that the mounting surface and fasteners are rated for the applied loads and pressure conditions; use appropriate couplings (ordered separately) and torque values to avoid deformation.

Does the Normally open solenoid valve, type VCF require specific coupling sizes ordered separately?

Yes. The product description for the Normally open solenoid valve, type VCF explicitly states "couplings to be ordered separately," which means specific coupling sizes are not included with the valve and must be chosen and purchased in addition. Because the valve is intended for highâpressure hydraulic systems (working pressure up to 250 bar) and uses standard hydraulic materials and seals (aluminum body, galvanized steel valve, NBR sealing), you should select couplings compatible with the valveâs port dimensions, pressure rating, and sealing material. Also confirm thread type and size, pressure rating â¥250 bar, and compatibility with NBR and your hydraulic fluid before ordering.

Normally open solenoid valve, type VCF

All products, Other high-pressure valves/

Additional information

Material	AL – aluminum

Two-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally open (NO) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DC-VCF06-NO-12DC	VCF solenoid valve, GW 3/8" BSP, 12V DC, normally open	-	250	In stock	Enquiry
DC-VCF06-NO-24DC	VCF solenoid valve, GW 3/8" BSP, 24V DC, normally open	-	250	In stock	Enquiry
DC-VCF08-NO-12DC	VCF solenoid valve, 1/2" BSP, 12V DC, normally open	-	250	In stock	Enquiry
DC-VCF08-NO-24DC	VCF solenoid valve, 1/2" BSP, 24V DC, normally open	-	250	In stock	Enquiry
DC-VCF12-NO-12DC	VCF solenoid valve, GW 3/4" BSP, 12V DC, normally open	-	250	In stock	Enquiry
DC-VCF12-NO-24DC	VCF solenoid valve, GW 3/4" BSP, 24V DC, normally open	-	250	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Two-way solenoid valve VCF designed for high-pressure hydraulic systems. Normally open (NO) variant. The valve is equipped with mounting holes (visible in the photo). couplings to be ordered separately. Material: aluminum (body), galvanized steel (valve). Sealing: NBR. Protection degree: IP65. Working pressure: 250 bar. Operating temperature: from -30°C to +100°C.